Boat Ventilation

ABS Flush Vent. 90mm x 90mm. For 70mm hose diameter. Available in black or white

ABS Plastic Hose Vent Dimensions. Available in Black or White. 4 Screw Attachment

Dimensions:

• 73mm Hose Diameter, 59mm Spigot Length, 90mm x 90mm
• 102mm Hose Diameter, 76mm Spigot Length, 125mm x 125mm

Plastic Louvered Vent 20cm x 10cm

Size: 26cm x 12cm. Screw hole distance to centres: 10.7cm high x 24.2cm wide

Plastic Screw Down Aerator Base Mushroom Vent. Complete with mosquito / insect guard.

Stainless Steel Round Louvered Vent - 125mm. Electro polished. Inner bezel diameter: 103mm

These are a completely waterproof version of the ECS Ventair/Ventilite ventilators. In cases of excessive water flow over the decks or coach roof, an inner sleeve complete with flush handle, is closed by moving in an upward direction to ensure 100% waterproofing.

Attractive ventilator with low profile design to avoid snagging on ropes and offering safe ventilation at all times.. This is one of the original ventilation systems specifically designed for marine use and is still one of the best. It is a proven reliable product; with thousands of units installed on both commercial and pleasure craft throughout the world in the last four decades.

This is one of the original ventilation systems specifically designed for marine use and is still one of the best. It is a proven reliable product; with thousands of units installed on both commercial and pleasure craft throughout the world in the last four decades.

These are a completely waterproof version of the ECS Ventair/Ventilite ventilators. In cases of excessive water flow over the decks or coach roof, an inner sleeve complete with flush handle, is closed by moving in an upward direction to ensure 100% waterproofing.

Small stainless steel shell vent polished finish with three hole fixing

Large Stainless Steel Mini Shell Vent

Height - 25mm
Width - 90mm
Length - 93mm

Complete ventilator with stainless steel cover. Stainless Steel cover is electro-polished and is graded AISI304. Lockable in closed position. Adjustable for deck or roof between 3-40 mm (1/8”-1 5/8”). Screws included.

Spare stainless steel cover only for 200mm mushroom vent

306 Marine Grade Stainless Steel Shell Vent. 5 screw holes. 140mm long x 115mm wide (at widest point) x 52mm high.

306 Marine Grade Stainless Steel Clam Shell Vent with raised square top. Available in two sizes - 170mm and 190mm

Stainless Steel Butterfly centre vent with centre knob. Available in two sizes: 102mm and 127mm

Made in 316 Stainless steel suitable for lockers, bulkhead and doors where permanent ventilation is required.

Available in 3 different sizes.
- 67mm (height) x 127mm (length)
- 115mm (height) x 230mm (length)
- 76mm (height) x 155mm (length)