Covers, Bags & Awnings

Blue Draylon Halyard Bag. Available in two sizes: 30cm and 45cm widths.

The Blue Performance Bulkhead Sheet Bag is made from ripstop / nylon material.  They are easily mounted to the Bulkhead with stainless screws and plastic hooks supplied with each unit. Store your sheets and other gear to avoid clutter in your cockpit. Look for the protective rain cover hidden in the back of the cockpit bags accessed at the bottom.

Grey PVC bags for tenders and small crafts with a bench. Features a 25mm thick foam for extra cushioned comfort. Suitable for 20cm deep x 2cm thick seat. Fits all Plastimo inflatable tenders. For removable bench. Holdall simply sleeves onto the bench.

• Halyard/Sheet Bag. PVC 500 Decitex.
• Coated on both sides and UV treated.
• White colour reduces heat absorption.
• Waterproof
• Minimum maintenance.
• Wash simply with sponge and soap.
• Mesh bottom for full drainage.
• Available in both 35cm and 45cm sizes.

Blue Performance Medium Halyard Bag

• Dimensions: 175 x 600 x 130mm
• Easy to install and remove.
• Velcro fastening.
• Rope clips inside packaging.
• Adjustable to mast.
• Made from a water repellent ripstop material.

Store your drinks, sun cream, etc, in this handy storage bag.

Features

• Attach and remove using Blue Performance screw-in hooks
• Flap with Velcro closure
• Waterproof, mildew and UV resistant material
• Ripstop lining
• 300mm X 200mm X 50mm

Net Storage Pocket! Ideal for your boat, caravan, camper, at home etc...

• Size - 30cm x 20cm
• Navy coloured
• 4 screw brackets.

Net Storage Pocket. Ideal for your boat, caravan, camper, at home etc...

• Size - 50cm x 18cm
• Elasticated net
• Black coloured
• 4 screw brackets.

Canopy / Cover Lashing Buttons Set of 4. Base diameter 25mm. Available in black and white.

TONNEAU BUTTON KIT - 10 x Norwegian Buttons, 10 x Stainless Steel Screws. Made in heavy gauge brass with heavy duty nickel plate finish. 11mm base diameter

White nylon injection molding around 1/8 inch stainless steel. Plug can secured by gluing, with a self tapping screw, or by a dowel pin. 19mm tube size.

A swivelling base fitting achieved by a three piece design allows for 200 degree variation in mounting angle. Fitting consists of three pieces which assemble into one fitting. Made from 316 stainless steel and nylon.

Nylon Inglefield Hook. Available in black or white. These are ideal for securing covers and are prevented from disappearing into cord runs by the novel fish-tails.

The Anchor Rode Bag is an indispenable aid to anchor management. Keep the anchor and chain in the bag. The anchor rope is fed through an eye in the bottom of the back before securing onto the boat. The anchor and chain can then be carried about the deck before releasing over the side or collected easily in the bag before returning to the locker.

Stainless Steel Canopy Top Cap for 22mm Tube. Manufactured from 316 Stainless Steel. 22mm tube size, 6mm pin size

The patented Holdon® Midi Clip is a great product designed specifically to grip up to 6mm thick fabrics and included with a quick release mechanism. Its ideal for retail sales, being the ultimate tarp clip. Its performance and appearance makes it perfect for camping, marine use, general DIY, garden applications and stage/TV events and it perform equally well on hemmed or on non hemmed fabric, i.e as tarp clips, banner eyelets, backdrop grommets etc.

Shroud / Cable Covers. Spread end of cable cover and snap cover over cable. Protect sails and sheets from chafe. Keep sails clean, prevent wear. Tough, UV resistant plastic. Available in a variety of sizes. 180cm in length.