CQUIP

Edging Trim, with a ductile aluminium core which allows the trim to be fitted to most shapes

Efficiently removes fumes from bilges or engine room. Strong ABS Housing with barbs to eliminate hose clamps.

Chromed Brass Push/Pull Switch. 12v DC 20amp, with chromed ABS pull. Stem Length: 32mm. Stem Diameter: 9.5mm. 2 terminals.

Waterproof push button switch. 12v DC 20amp. Stem Length: 23mm. Stem Diameter: 16mm. Available with black cap (pictured) or red cap

Seaworld 12v Single Compact Horn

In-line fuse holder rated to 15amps. For 29mm fuse

These 20 LED replacement bulb clusters are designed to fit into a standard incandescent bayonet fitting and will save a HUGE amount of onboard power consumption. Available in white only, 12v. Available with level or offset studs

Polypropeylene construction and waterproof. 3 Positions - OFF - IGN - START. Thread itself is non-adjustable but brass washer can be adjusted to ensure a snug fit when installed. Maximum thread length 25mm / 1"

304 Grade Stainless Steel Grab / Hand Rails. 25mm diameter Grab Rails for under deck fastening with an M6 stud or bolt.  Available in 9", 12", 18", 24" & 36" lengths.

304 Marine Grade Stainless Steel Bow Roller with Pin. With rubber wheel. See images for product dimensions.

304 grade stainless steel universal bow roller. See images for full product dimensions.

Lockable hasp.

Manufactured from 306 grade stainless steel. Comes supplied with two keys. Available in two sizes (dimensions given is for when product is closed):

• 80mm x 30mm
• 105mm x 30mm

Stanchion socket

316 Stainless Steel 90 Degree Deck Hinge. With removable pin. 18mm x 57mm base. 6mm pin size.

Die cast type 316 stainless steel deck hinge with mirror polished finish

Heavy duty hinge - manufactured from cast 316 Stainless Steel, and hand polished

Polypropylene construction and waterproof. 4 Position Ignition Switch (Push Choke)

New Panel Design for Indoor and Outdoor use (IP65). Permanent Green LED label light, switching to RED for "ON"

Stainless Steel Straight Blades with 5mm receptacle. Available in 280mm and 355mm lengths

Stainless steel body with hardened steel shackle and brass barrel. Two keys are supplied. Padlock is 70mm diameter with a 9.5mm shackle

Foldaway PVC bucket

Flush mount fishing rod holders can accommodate rod handles up to 41mm in diameter and will keep your rod right where you need it. Featuring pre-drilled holds for easy installations and is screwed down with 3 M12 countersunk screws (not included). Made from injection molded ABS and is fixed at an angle of 30 degrees.

ABS Flush Vent. 90mm x 90mm. For 70mm hose diameter. Available in black or white

The ideal solution to a slippery deck or anywhere you need an anti-skid surface. Simple and easy to use. Just cut to length, peel off the backing paper and apply.

The ideal solution to a slippery deck or anywhere you need an anti-skid surface

BA15D Offset pin navigation bulb

Battery Switch mounted on an aluminium panel. 101mm x 76mm. 500A momentary, 75A Continuous. Comes with removable key

These 5 LED replacement bulbs are designed to fit into a standard incandescent bayonet fitting and will save a HUGE amount of onboard power consumption.

BAY 15D LED Offset Pin Replacement Bulb Assembly (Premium)

• 30x LED
• 1.6w
• 12v / 24v
• 140mA @ 12v
• White
• Aluminium Housing

Bilge Pump Control Switch. Waterproof with LED illuminated, 3 position rocker switch. 76 x 63mm. ON - OFF - Momentary ON

• Black nylon fairlead.
• Comes in packs of 2.
• 113mm (L) x 25mm (W)

 Blank Switch Cap for Momentary Rocker Switches. These fit the CQUIP momentary rocker switches

Zinc plated seat swivel, will fit most seats.  Rotates through 360 degrees. 165mm x 165mm

Flip Top / Snap Tight Brass Drain Plug. To fit 25mm / 1" drain holes. Simply press into the drain and snap the lever down. This action expands the rubber just enough to create a tight seal.

Forged Brass Garboard drain and plug. Threaded drainplug made from brass. Kit includes female drainplug recepticle and standard brass plug. 1/2" NPT thread. Cut Out diameter: 28.mm. Flange diameter: 55mm

Screw Top Brass / Turntight Drain Plug. To fit 25mm / 1" drain holes. Simply press into the drain and turn the lever. This action expands the rubber just enough to create a tight seal.

Chrome Brass. Catch (L) 22mm - (W) 14mm - (H) 30mm. Plate (L) 22mm- (W) 14mm

Chrome plated brass deck plug and socket. Made in brass to the highest specification and chrome plated to provide a bright finish. Complete with captive screw-on cap and rubber mounting gasket.

Chrome plated brass deck plug and socket. Made in brass to the highest specification and chrome plated to provide a bright finish. Complete with captive screw-on cap and rubber mounting gasket.

Chrome plated brass stud door catch. Available in 44mm, 49mm and 60mm lengths.

This spray nozzle can be used with our fresh water pump for wash down applications

Angled hold down catch. Made from chromed brass. 100mm given is length when closed.

Chromed Brass. 100mm is the length when closed.

Cloth Winch Handle Holder

100mm wide
285mm long
70mm deep

Dimple end festoon bulb - replacement for Aqua Signal S25 navigation lights.

This 12V Boat Horn emits a deep sound at 340Hz for good attenuation through mist and fog. Made from chromed brass and easy to install.

Fabricated Stainless Steel Hand Polished Door Hook, with a plastic bushing in the eye which prevents accidental unhooking due to vibration. This bushing also absorbs rattling sounds.

Stainless Steel telescopic ladder with moulded plastic steps. Over platform mount. Steps can be folded upwards for practical length adjustment. Steps are safely held in place by a plastic clip attached to the side of the ladder.

Plastic Guardrail Backrest. A comfortable backrest that simply clips onto your guardrail. Easy to fit moulded design. Tough & Durable. Width: 35cm. Height: 18cm

Adjustable - can fit up to 13mm motor shaft. Supplied with adaptor for shafts down to 6mm except for wiper arms 305mm - 457mm and 457mm - 610mm which do not come with this adaptor and are just for 13mm motor shaft.

Heavy Duty Fully sealed, waterproof ASA housing and base. Sweep angle may be adjusted to 45, 60, 80 and 110 Degrees. Powers 22" Arm and Blade combination. Two Speed. 38mm or 63mm Standard Shaft lengths available.

 Marine Grade aluminium panel with 6 illuminating switches and 6 fuse holders. Includes 8 fuses - 2 x 3amp, 4 x 5amp and 2 x 10amp. Customisable with included labels.

Thermo Plastic Snap Mount Replacement Rocker Switch, with plug-intype terminals and a red rocker, 12v DC 15amp.

306 Marine Grade Stainless Steel Shell Vent. 5 screw holes. 140mm long x 115mm wide (at widest point) x 52mm high.

306 Marine Grade Stainless Steel Clam Shell Vent with raised square top. Available in two sizes - 170mm and 190mm

These hinges have the pin situated on top of the hinge, and requires a no. 8 countersunk screw to fix it.

These hinges have the pin situated on top of the hinge, and requires a no. 8 countersunk screw to fix it.

These hinges have the pin situated on top of the hinge, and requires a no. 8 countersunk screw to fix it.

These hinges have the pin situated on top of the hinge, and requires a no. 8 countersunk screw to fix it.

These hinges have the pin situated on top of the hinge, and requires a no. 8 countersunk screw to fix it.

These hinges have the pin situated on top of the hinge, and requires a no. 8 countersunk screw to fix it

These hinges have the pin situated on top of the hinge, and requires a no. 8 countersunk screw to fix it.

Marine Speaker. Round two-way speaker. Splash Proof. 8ohm impedance

Molded Neoprene Line Connector. Moulded Neoprene Line Connector maximum 10amp. Available with 2 pin, 3 pin (shown) or 4 pin.

Push Button switch for flush fitting. Momentary switch (only on when depressed) . Flat-plug connection and waterproof cover. For instrument panels up to 4mm thick.

Momentary Rocker Switch. Available as the following:(On) - Off - On / On - Off - On. Functions in (brackets) are momentary

One Way Hose Connector made from sturdy polypropylene.  A built in rubber flap allows water to flow in one direction only.  Each section can be cut down to size of hose barb required. The material inside is name from nitrile rubber, or NBR. These valves are not suitable for any system that uses chlorine.

Stainless Steel outboard motor bracket with marine plywood pad. Bracket suitable to take outboard up to maximum of 10hp

Oval Chromed Drain Plug. Large oval barbed drain plug. With chromed brass base. 25mm and 32mm drain-hole sizes available.

 

 

Stainless Steel Over platform telescopic ladder

• 3 Step - Length* 850mm - Width 250mm
• 4 Step - Length* 1168mm - Width 311mm

*When Deployed

Plastic deck connector. Available in either 2 pin or 3 pin, 3 amp or 5 amp.

Size: 26cm x 12cm. Screw hole distance to centres: 10.7cm high x 24.2cm wide

Black plastic curved windscreen wiper blade. With 7mm receptacle. Sold singularly. Available in the following sizes:

• 12"
• 14"
• 16"
• 18"
• 20"
• 22"
• 24"

Complete Rail Mount Bracket with Stainless Steel Fixing Screws. This Rail Mount accessory is designed for easy attachment to tube 22mm - 25mm dia, without having to drill holes in your boat.

This Rail Mount accessory is designed for easy attachment to tube 22mm - 25mm dia, without having to drill holes in your boat. 114mm long, black nylon cleat set

This Rail Mount accessory is designed for easy attachment to tube 22mm - 25mm dia, without having to drill holes in your boat. Kit with 17mm Fairlead Eye

Rail Mount Rope Hook Kit very useful for keeping ropes/hooks/life jackets tidy and handy

Railmount Support Plate. Available in 44mm x 44mm or 19mm x 51mm. 44mm x 44mm Support Plates Available With Screw or Slot Holes. Stainless Steel

Rectangular hatch ring pull. Brass with chrome plating. Base Dimensions: 38mm x 44mm.

Red plastic winch handle / key. 122mm long.

Cquip Replacement Nylon Wheel for Bow Roller. Available in small and large sizes. Dimensions for each size are shown in the image gallery. Centre hole diameter for both small and large sizes is 12mm.

Rocker Switch mountings for rocker switches manufactured from injection moulded nylon. Available for end, middle or single rocker switches.

Screw in fuse holder.

Available in 20mm and 29mm sizes.

Service kit for Aqualine compact bilge pump. Contains diaphragm, inlet and outlet valves, and fixings.

Small stainless steel shell vent polished finish with three hole fixing

Stainless Steel Flush 2 Pin Hinge, with casted centre piece, ideal for folding tables

Stainless Steel Anchor Chain Stopper. Prevents damage to windlass. Made from stainless steel

Mirror polished Heavy duty construction with diamond tread pattern. Handy grab opening makes this folding step an ideal transom step. Can be useful in many hard-to-reach locations. Stainless steel spring plate for positive action.

Stainless Steel (304 grade) Bow Roller with rubber wheel. (L) 159mm x (W) 51mm 

Stainless Steel Butterfly centre vent with centre knob. Available in two sizes: 102mm and 127mm

Stainless Steel Canopy Top Cap for 22mm Tube. Manufactured from 316 Stainless Steel. 22mm tube size, 6mm pin size

Stainless Steel Cuddy Hinge. Measures 127mm (37mm + 90mm) x 40mm

Stainless Steel Cuddy Hinge. Measures 180mm x 40mm

Stainless Steel cuddy hinge, beautifully hand buffed and passivated

Stainless Steel Cuddy Reverse Hinge. Measures 127mm (37mm + 90mm) x 40mm

306 Grade stainless steel deck plate key. Spaced at 3.5" / 88mm

Stainless steel flag pole. Diameter: 25mm. Length: 1020mm. Lug Distance: 366mm. Comes with a black cover for when being stored / not in use.

Stainless Steel Adaptor Plate. Used to convert stainless steel grab handrails to above deck fastening. 2 needed per rail.

Long Pad Eye. Manufactured from 304 marine grade stainless steel. Available in the following sizes:

• 45 x 15mm Base, 10 x 12mm eye diameter
• 60 x 20mm base, 14 x 17mm eye diameter
• 81 x 26mm base, 19 x 22mm eye diameter
• 100 x 32mm base, 24 x 29mm eye diameter.

Large Stainless Steel Mini Shell Vent

Height - 25mm
Width - 90mm
Length - 93mm