CQUIP

Seasure's range of deck eyes, clips and hooks are manufactured from top grade AISI 316 stainless steel. They undergo multiple machining and finishing operations to ensure they have a smooth finish and are free of damaging sharp corners and burrs.

This beautiful socket is rail mounted with minimal visible fixings. A secure and easy way to mount flags to a pushpit rail. 316 Stainless Steel casting. For 1" (25.4mm) Flag Staff. Will mount to rail 20mm or 25mm (1") with insert included.

 Highly polished 304 stainless steel rub strakes. Available in 8", 12", 18" and 24" sizes. Hole size #8. Approximate width: 18.4mm (the 18" strake is also available with a width of 1" / 24.8mm)

 

 

Stainless Steel Trumpet Horn, ideal for saltwater use and has an all stainless steel construction

12v Stainless Steel interior light with switch. Clear lens. Available in three sizes:

• 111mm (76mm lens diameter) - 10w
• 140mm (102mm lens diameter) - 15w
• 171mm (127mm lens diameter) - 15w

Heavy Duty 304 stainless steel Tube. Cast 316 Stainless Steel Tops. Overall length 520mm

This ski tow hook can be used on all types of ski boat applications. Cast in 316 stainless steel and beautifully polished.

Ring diameter: 66mm
Stock diameter: 9.5mm
Stud length: 63mm

Transom Vents. Made from 304 grade stainless steel

Stainless steel winch key. Manufactured from 316 grade stainless steel

Stamped 304 Stainless Steel Spring Loaded Ring Pull. Available in two sizes: 38 x 45mm and 66 x 55mm.

Straight Skin Fittings moulded in fibre reinforced Acetal with beautifully polished stainless steel cap that is ultrasonically welded onto the flange. Light weight and highly corrosion resistant.

Surface Mount Winch Handle Holder

Diameter: 52mm
Height: 24mm
Screw Centres: 37mm

Perfect for holding wine bottles, long or large glasses and cans these attractive varnished teak wine holders are the perfect addition to any cabin or room. Screw holes are pre cut allowing the wine holder to be mounted to any wall or vertical surface.

Stylish and beautifully finished holder for mugs, glasses, cans and bottles. This mug holder can be attached to any wall or vertical surface, Pre cut screw holes to allow easy fitting.

Teak finger ring

Teak Handrail. Solid teak. Traditional look and style.

Teak Ceiling Light with Brass Trim. 12v DC / 15w. Lens Diameter: 102mm. Overall Diamter (Base): 146mm

Mini navigator rack. Made from teak. Measures 120mm x 80mm x 28mm

Teak Outboard Bracket for 25mm tube

A stylish and well finished teak holder for one mug or glass. Can be easily fitted to any wall, vertical or flat surface.

Thermo Plastic Push/Pull switch. 12v DC 6amp. Stem 19mm x 8mm dia.

Marine Grade aluminium panel with 4 illuminating switches and 4 fuse holders. Includes 8 fuses - 2 x 3amp. Customisable with included labels. 4 x 5amp and 2 x 10amp.

 Marine Grade aluminium panel with 6 illuminating switches and 6 fuse holders. Includes 8 fuses - 2 x 3amp, 4 x 5amp and 2 x 10amp. Customisable with included labels.

 

 

Chrome Plated Brass Cable Outlets, with rubber gaskets. Manufactured in high quality chrome plated brass. Three hole flange fixing. Waterproof

Manufactured from corrosion resistant materials. Sold in a black case and designed for frame mount. 

• Overall length of spindle: 50mm
• Length of threaded part of spindle: 35mm
• Length of non-threaded end of spindle: 15mm
• Diameter of threaded part of spindle: 9mm
• Diameter of non-threaded end of spindle: 6mm

Available with either 80 or 110 degree wiping arcs.

This is a new Water Manifold and has been carefully designed to reduce the weight and cost associated with traditionally fabricated water system manifolds. The complete Y-Piece operates with hose sizes of 3/4", 1" and 1 1/2" and is designed to simply cut it down to size.