Deck Hardware

Black Nylon Cleat with open base to help retain the rope end.Available in a variety of sizes.

304 grade stainless steel universal bow roller. See images for full product dimensions.

Chromed Step Pad 222mm x 57mm

The Clamcleat® CL223 Loop cleat is a nylon cleat for tensioning lines. Rigged onto a rope, the CL223 is quick to tension, easy to adjust and release. Made from outdoor grade nylon. Completely corrosion proof. Available in 2 standard colours: CL223 is Black. CL223W is White. Packaged with instructions.

Rigged on a rope with 2:1 advantage. The tooth design of the Clamcleat® CL234 allows a positive grip on the rope that is easy to release making it ideal for tensioning sports nets, radio masts, tents, canvas structures and fenders. It can be used for suspending curtains and tensioning banners in a theatre. The black CL234 is used on Physiotherapy equipment. Made from outdoor grade nylon. Completely corrosion proof.  Available in 2 standard colours: CL234 is Black. CL234W is White. 

304 Marine Grade Stainless Steel Bow Roller with Pin. With rubber wheel. See images for product dimensions.

The Barton Shroud Cleat is a handy cleat that simply clamps onto shroud wire (max 8mm) without causing damage. A plain cleat for flag halyards. Weight: 26g. Length: 100mm

Manufactured in marine grade aluminium and finished in Barton's unique hard ‘Spectro’ grey anodising. These lightweight high load eyes are suitable for a variety of uses on board, from lazy jacks, barber haulers, mast base tidies to stanchion lead eyes. 

A handy cleat that simply clamps onto shroud wire (max 8mm) without causing damage. Features a wide eye opening for stowage of halyard shackles. Weight: 26g. Length: 100mm

Stainless Steel (304 grade) Bow Roller with rubber wheel. (L) 159mm x (W) 51mm 

Manufactured from a composite Kevlar/Zytal material and available in 3 sizes to accept lines up to 14mm in diameter. This advanced material offers performance advantages over carbon fibre and conventional glass-reinforced resins; 'K' cams are very strong, lightweight and have excellent wear-resistance. A progressive tooth design ensures maximum holding power on all types of line, whilst maintaining minimum wear to both cam and line.

Cquip Replacement Nylon Wheel for Bow Roller. Available in small and large sizes. Dimensions for each size are shown in the image gallery. Centre hole diameter for both small and large sizes is 12mm.

Barton Budget Cam Cleats. Available in mini, midi and maxi sizes.

Barton pillar fairleads. These add-ons enable the cam cleat to be engaged from a variety of angles. Cams can be fitted either way around to achieve a lead from in front or behind.

Barton Top fairleads - Incorporating stainless steel reinforcing for added strength and wear resistance. For both Barton 'K' Kevlar and Budget Cam Cleats. Available for Mini, Midi and Maxi sizes.

Barton Wire Front Fairleads. For use only with Barton K Kevlar Cam Cleats. Made from Stainless Steel. Available for mini, midi and maxi sizes.

With the CL205 the rope drops down into the teeth to give a quick, positive lock that is easy to release. The cleat is manufactured from UV resistant plastic making it cost effective and ideal for holding rope in an outdoor environment.

With the CL209 the rope drops down into the teeth to give a quick and positive lock that is easy to release. The cleat is maufactured from UV resistant plastic, making it cost effective and ideal for holding rope in an outdoor environment.

The Clamcleat® CL211 Mk2 is a neat, compact alloy cleat with many uses for sailing, kitesurfing, sports equipment and industrial applications. Manufactured from aluminium for light weight and durable performance. Ideal for halyards & control lines on dinghies & kayaks. Can also be used on sports nets. The fairlead guides the rope into the cleat, which can be fitted to all curved and flat surfaces. Using a CL819 Tapered Pad allows the CL211 Mk2 to be fitted at an angle. This can allow tensioning without rubbing the rope over the teeth. Fitting a CL815 Keeper and CL817 Cage extends the versatility of of his cleat.

Clamcleat CL228 - Vertical with Integral Fairlead. A compact black nylon cleat with integral fairlead to guide the rope into the teeth.

With the CL254 the rope drops down into the teeth to give a quick and positive lock that is easy to release. Will hold very high loads when used with high quality ropes. 

HOLT Open base Fairlead with stainless steel liner.

• Pack of 2, code HT 4282*2
• Weight: 11gm
• Hole centres: 25mm
• Fixing: 4mm
• Opening: 10mm

316 Cast Stainless Steel Fairlead Straight. Available in 5" or 6" lengths.

316 Grade Stainless Steel Eyestraps. Size given is for the thickness of the eyestrap.

Pair of Stainless Steel Handed Fairleads. Used to guide a line, rope or cable around an object, out of the way or to stop it from moving laterally. Available in two sizes, which is of the total length: 4 1/2" (114.3mm) and 6" (52.4mm)

• Black nylon fairlead.
• Comes in packs of 2.
• 113mm (L) x 25mm (W)

• Black nylon fairlead
• 154mm (L) x 33mm (W)
• Sold in packs of 2

Barton Drain Plug and Socket. This screw type drain plug from Barton is available in both black or white. A rubber 'O' ring is supplied and fitted to ensure a watertight seal.

 

 

Flip Top / Snap Tight Brass Drain Plug. To fit 25mm / 1" drain holes. Simply press into the drain and snap the lever down. This action expands the rubber just enough to create a tight seal.

Screw Top Brass / Turntight Drain Plug. To fit 25mm / 1" drain holes. Simply press into the drain and turn the lever. This action expands the rubber just enough to create a tight seal.

Oval Chromed Drain Plug. Large oval barbed drain plug. With chromed brass base. 25mm and 32mm drain-hole sizes available.

 

 

Plastic Drain Socket with Screw In Plug. Holeless.

• Flange diameter: 48mm
• Height: 76mm
• Threaded Height: 66mm
• Flush mounting diameter: 28mm
• Internal Diameter: 19mm

304 Grade Stainless Steel Grab / Hand Rails. 25mm diameter Grab Rails for under deck fastening with an M6 stud or bolt.  Available in 9", 12", 18", 24" & 36" lengths.

Stainless Steel Adaptor Plate. Used to convert stainless steel grab handrails to above deck fastening. 2 needed per rail.

Waveline stainless steel deckfiller with 1 1/2" hosetail. Includes two-prong key for the easy tightening / removal of the lid. Lid is chained to the deck filler meaning that it cannot be lost overboard or misplaced. Lid is sealed with a rubber o-ring to ensure watertightness. The top of the deckfiller has the purpose engraved on it - Diesel (as shown in image), water, or fuel.

Treadmaster Marine grip pads and sheets are suitable for areas and objects requiring easy to fit anti-slip covering. They can easily be trimmed using a craft knife or sharp scissors. Product benefits include being unaffected by exposure to sea water due to the nitrile rubber/PVC formulation and resistance to the chemical effects of oil, fuel and other commonly used substances.

Treadmaster Marine grip pads and sheets are suitable for areas and objects requiring easy to fit anti-slip covering. They can easily be trimmed using a craft knife or sharp scissors. Product benefits include being unaffected by exposure to sea water due to the nitrile rubber/PVC formulation and resistance to the chemical effects of oil, fuel and other commonly used substances.

Treadmaster Marine grip pads and sheets are suitable for areas and objects requiring easy to fit anti-slip covering. They can easily be trimmed using a craft knife or sharp scissors. Product benefits include being unaffected by exposure to sea water due to the nitrile rubber/PVC formulation and resistance to the chemical effects of oil, fuel and other commonly used substances.

Treadmaster Marine grip pads and sheets are suitable for areas and objects requiring easy to fit anti-slip covering. They can easily be trimmed using a craft knife or sharp scissors. Product benefits include being unaffected by exposure to sea water due to the nitrile rubber/PVC formulation and resistance to the chemical effects of oil, fuel and other commonly used substances.

Treadmaster Marine grip pads and sheets are suitable for areas and objects requiring easy to fit anti-slip covering. They can easily be trimmed using a craft knife or sharp scissors. Product benefits include being unaffected by exposure to sea water due to the nitrile rubber/PVC formulation and resistance to the chemical effects of oil, fuel and other commonly used substances.

Chrome plated brass snap fender hook

• Depth: 34mm
• Height: 30mm
• Width: 25mm

 Lifting Ring. Made from 316 marine grade stainless steel. Dimensions: 38mm x 48mm.

 

 

Designed for use when leading control lines halyards across the coach roof and back to the cockpit. This range features aluminium construction with 'Spectro' grey annodised finish. Sheaves are from moulded acetal with hollow rivets to allow easy and tidy fitting.

The Seasure range of deck eyes are manufactured from top grade AISI 316 stainless steel. They undergo multiple machining and finishing operations to ensure they have a smooth finish and are free of damaging sharp corners and burrs.

Pack of 2 Spar Eyes to fit Curved Pole. Curved base will fit 25 or 32mm diameter poles. Overall height: 27mm

Spar clip height 14mm hole centres for tube dia 50-57mm fixing dia 5mm, material stainless steel 316 with well flared edges for use as line leads

Manufactured from electro polished 316 stainless steel for a long, corrosion-free life. The flexible bracket can be used in places where crew may stand on them or where reduction in noise inside the boat is required.

Spinnaker guy hook positioned close to the shrouds, these hooks retain the spinnaker guy when reaching or running

Complete Rail Mount Bracket with Stainless Steel Fixing Screws. This Rail Mount accessory is designed for easy attachment to tube 22mm - 25mm dia, without having to drill holes in your boat.

Railmount Support Plate. Available in 44mm x 44mm or 19mm x 51mm. 44mm x 44mm Support Plates Available With Screw or Slot Holes. Stainless Steel

Rectangular hatch ring pull. Brass with chrome plating. Base Dimensions: 38mm x 44mm.

Shroud Adjuster

Folding Pad Eye.

Made from 316 grade stainless steel.

Available in two sizes:

• Length: 50mm, Width: 45mm
• Length: 65mm, Width: 59mm

Seasure's range of deck eyes, clips and hooks are manufactured from top grade AISI 316 stainless steel. They undergo multiple machining and finishing operations to ensure they have a smooth finish and are free of damaging sharp corners and burrs.

Extends the life of ropes, tamps and removes sound from cleats. Made out of UV-resistant sturdy polyurethane to endure the harshest marine environments. Easy mounted/wrapped and no additional attachment necessary. A special technique enables the cover to automatically wrap around ropes and tamps, which provides a perfect fit. It also reduces squeaking from the mooring cleat and protects the boats gelcoat against wear.

Wear And Tear Pads are the original and first of the type on the market. We have continuously refined and improved our pads based on real-world customer feedback. Wear And Tear Pads have been positively reviewed by most of the world’s leading boating magazines.

 Highly polished 304 stainless steel rub strakes. Available in 8", 12", 18" and 24" sizes. Hole size #8. Approximate width: 18.4mm (the 18" strake is also available with a width of 1" / 24.8mm)

 

 

Stainless Steel Eye Plate. Manufactured from AISI 316 marine grade stainless steel. Available in 30mm x 35mm, 35mm x 40mm and 40mm x 50mm

Stanchion socket

Heavy Duty 304 stainless steel Tube. Cast 316 Stainless Steel Tops. Overall length 520mm

Clip for stanchion. Available in 1" (25mm) and 1.25" (32mm) sizes.

Backing plate for Stanchion Clips. Available for the 1" (25mm) and 1.25" (32mm) stanchion clips.

• Screwhole to Screwhole distance for 1" stanchion clip backing plate: 51mm
• Screwhole to Screwhole distance for 1.25" stanchion clip backing plate: 62mm

Stanchion Mounted Spinnaker Pole Bracket (15.71). Stanchion Mounted bracket for 25mm dia. stanchion. Manufactured from electro polished 316 stainless steel for a long, corrosion-free life. The flexible bracket can be used in places where crew may stand on them or where reduction in noise inside the boat is required

Nab Shackles - The Ultimate Light Weight Plastic Shackle! Perfect for Spinnaker Sheets in light airs. Ideal for securing Spray Dodgers, Covers and Fenders.

Suitable for sailing, wind surfing, canoeing etc applications.

Camcleat Grippit. Available in small (3-7mm) and medium (5-12mm)

Holt Bullseye Fairlead with Stainless Steel Insert. ERGO DESIGN - New ergonomic design reducing accidental line snags. Modern spark finish. FIXING BORES - Allows flush mounting of fasteners with large counter sinks taking a wider variety of fastening. STAINLESS INSERTS - Greater wear resistance with 316 inserts flush fitted.

Cleats for 4 - 8 mm (5/32" - 5/16") rope. CL231 - Midi with Integral Fairlead. A compact black nylon cleat with integral fairlead to guide the rope into the teeth. Same hole centres as CL209 and CL254.

Cleats for 10 - 16 mm (3/8" - 5/8") rope. CL220 - Racing Major. With the CL220 the rope drops down into the teeth to give a quick and positive lock that is easy to release.  Manufactured from aluminium for light weight and durable performance. It is available in a silver stove enamel finish for a cost effective, high quality coating. Suitable for all inland and coastal conditions.

Cleats for 3 - 6 mm (1/8" - 1/4") rope. CL222 - Racing Mini. An elegant design in aluminium with a silver or hard anodised fiinish. The rope drops down into the teeth.

D Rings are manufactured from Type 316 stainless steel, which is chemically and passivated after welding to reduce the risk of staining. TIG welded maximises strength.

Round stainless steel ring. Made from 304 Stainless Steel

45mm
- Internal Diameter: 45mm
- Ring Diameter: 6mm

75mm
- Internal diameter: 75mm
- Ring diameter: 10mm

Flush mount fishing rod holders can accommodate rod handles up to 41mm in diameter and will keep your rod right where you need it. Featuring pre-drilled holds for easy installations and is screwed down with 3 M12 countersunk screws (not included). Made from injection molded ABS and is fixed at an angle of 30 degrees.

Chrome Hold Down Catch Lock with Padlock Eye. 90mm long. Available with either flat base (4 screw hole) or right-angled base (3 screw hole)

Emergency wooden plug set. Set of wooden conical plugs with different diameters and lengths. 9 plugs per bag

Graduating sized plugs used as an emergency repair following a breach in the hull or skin fitting.

AISI 316 marine grade Stainless steel flush mounted fishing rod holder. With oval lid and seal. Flush mount is at a 45 degree angle.

• A: 230mm
• B: 107mm
• C: 41mm
• D: 91mm
• E: 51mm
• Angle: 45 Degrees
• Weight: 500g

304 marine grade polished stainless steel lockable lift handle. Measures 49 x 55mm

Angled hold down catch. Made from chromed brass. 100mm given is length when closed.

Chromed Brass. 100mm is the length when closed.

Swedish brass jib hanks are renowned world-wide for quality, reliability and ease of fitting. Forged from marine quality brass and fitted with a stainless steel spring. B516 has a jaw opening of 25mm and internal dimensions of 25mm x 29mm. It is designed for use over forestay systems for storm jibs, not for large genoas.

Plastic jib hanks are ideal for dinghies, dayboats and sportsboats up to 25 feet. Available with 3.5mm (A038) and 5mm (A039) Forestay Diameter for wire plastic.

Nylon Jam cleat with V jammer for 6mm line. Length 54mm. RWO code: R3670. Product Information:

• Boat type: Catamaran, monohull dinghy, single handed dinghy, sports boat, yacht.
• Dimensions: 54mm
• Fixing: 2 x 4mm countersunk (not included)
• Line diameter: 6mm
• Pack quantity: 2
• Weight: 5g

This Rail Mount accessory is designed for easy attachment to tube 22mm - 25mm dia, without having to drill holes in your boat. 114mm long, black nylon cleat set

Stainless steel 4 hole flat cleat

Long Pad Eye. Manufactured from 304 marine grade stainless steel. Available in the following sizes:

• 45 x 15mm Base, 10 x 12mm eye diameter
• 60 x 20mm base, 14 x 17mm eye diameter
• 81 x 26mm base, 19 x 22mm eye diameter
• 100 x 32mm base, 24 x 29mm eye diameter.

White PVC spinnaker pole brackets. Set of 2 deck housing brackets. Size inside shoe: 70 x 90mm

Plastic expanding drain plugs. Simply flip the top down to expand the plug and seal the drain. Available for 22.5mm, 35mm and 40mm

Forged Brass Garboard drain and plug. Threaded drainplug made from brass. Kit includes female drainplug recepticle and standard brass plug. 1/2" NPT thread. Cut Out diameter: 28.mm. Flange diameter: 55mm

Bronze Cockpit Drain - through hull outlet with reverse inclined head

Gunmetal Drain Plug. LG2 gunmetal threaded BSP drain plug. Available in two sizes: 1/2" and 1". Each drain plug requires 3 bronze countersunk screws (not supplied)

Steel, galvanised finish. These cleats are used for tying up boats for mooring or useful for tying other equipment and fittings to a boat. Galvanised finish prevents rust.

Holt Deck Bush with Stainless Steel Insert

306 Grade stainless steel deck plate key. Spaced at 3.5" / 88mm

Marine grade 316 A4 stainless steel low flat cleats. Not certified for lifting. Used for mooring.

RWO 10mm Deck Eye Clips - Pack of 4

• Diameter: 5mm
• Eye Size: 10mm
• Overall Length: 38mm
• Screwhole to Screwhole: 25mm
• Screwhole Diameter: 5mm
• Width: 11mm
• Type: Standard Clip

 

Screw type stainless steel hollow base cleat.

Available in 4", 6", 8" and 10" sizes

Popular transom drain for dinghy and rib applications. The drain has a flap valve to help reduce water re-entering the craft when non planing.

Bung size 22mm

This Rail Mount accessory is designed for easy attachment to tube 22mm - 25mm dia, without having to drill holes in your boat. Kit with 17mm Fairlead Eye

Stainless steel swivel eye plate

• Measures 35mm x 35mm
• With 4 countersunk screwholes for M4 screws.
• Ring thickness: 5mm
• Eye diameter: 15mm

1 1/2 inch BSP Countersunk fitting with grating, ideally suited for deck drains, shower trays, etc. Features stepped hosetail for 32mm or 38mm ID hose. Overall Diameter: 70mm. Maximum deck thickness: 40mm.