Flags & Pennants

Alderney Courtesy Flag. Courtesy Flags are used on Vessels when in foreign waters as a sign of peace and respect. Manufactured in best quality polyester bunting. Measures 12 x 18 inches (30cm x 45cm)

Breton Courtesy Flag. Courtesy Flags are used on Vessels when in foreign waters as a sign of peace and respect. Manufactured in best quality polyester bunting. Measures 12 x 18 inches (30cm x 45cm)

Cornwall Courtesy Flag. Courtesy Flags are used on Vessels when in foreign waters as a sign of peace and respect. Manufactured in best quality polyester bunting. Measures 12 x 18 inches (30cm x 45cm)

Devon Courtesy Flag. Courtesy Flags are used on Vessels when in foreign waters as a sign of peace and respect. Manufactured in best quality polyester bunting. Measures 12 x 18 inches (30cm x 45cm)

EU / European Union Courtesy Flag. Courtesy Flags are used on Vessels when in foreign waters as a sign of peace and respect. Manufactured in best quality polyester bunting. Measures 12 x 18 inches (30cm x 45cm)

France / French Courtesy Flag. Courtesy Flags are used on Vessels when in foreign waters as a sign of peace and respect. Manufactured in best quality polyester bunting. Measures 12 x 18 inches (30cm x 45cm)

Germany Courtesy Flag. Courtesy Flags are used on Vessels when in foreign waters as a sign of peace and respect. Manufactured in best quality polyester bunting. Measures 12 x 18 inches (30cm x 45cm)

Greece / Greek Courtesy Flag. Courtesy Flags are used on Vessels when in foreign waters as a sign of peace and respect. Manufactured in best quality polyester bunting. Measures 12 x 18 inches (30cm x 45cm)

Guernsey Courtesy Flag. Courtesy Flags are used on Vessels when in foreign waters as a sign of peace and respect. Manufactured in best quality polyester bunting. Measures 12 x 18 inches (30cm x 45cm)

Ireland Courtesy Flag. Courtesy Flags are used on Vessels when in foreign waters as a sign of peace and respect. Manufactured in best quality polyester bunting. Measures 12 x 18 inches (30cm x 45cm)

Italy / Italian Courtesy Flag. Courtesy Flags are used on Vessels when in foreign waters as a sign of peace and respect. Manufactured in best quality polyester bunting. Measures 12 x 18 inches (30cm x 45cm)

Jersey Courtesy Flag. Courtesy Flags are used on Vessels when in foreign waters as a sign of peace and respect. Manufactured in best quality polyester bunting. Measures 12 x 18 inches (30cm x 45cm)

Malta Courtesy Flag. Courtesy Flags are used on Vessels when in foreign waters as a sign of peace and respect. Manufactured in best quality polyester bunting. Measures 12 x 18 inches (30cm x 45cm)

Portugal / Portuguese Courtesy Flag. Courtesy Flags are used on Vessels when in foreign waters as a sign of peace and respect. Manufactured in best quality polyester bunting. Measures 12 x 18 inches (30cm x 45cm)

Spain / Spanish Courtesy Flag. Courtesy Flags are used on Vessels when in foreign waters as a sign of peace and respect. Manufactured in best quality polyester bunting. Measures 12 x 18 inches (30cm x 45cm)

St. George Courtesy Flag. Courtesy Flags are used on Vessels when in foreign waters as a sign of peace and respect. Manufactured in best quality polyester bunting. Measures 12 x 18 inches (30cm x 45cm)

Sweden / Swedish Courtesy Flag. Courtesy Flags are used on Vessels when in foreign waters as a sign of peace and respect. Manufactured in best quality polyester bunting. Measures 12 x 18 inches (30cm x 45cm)

Wales / Welsh Courtesy Flag. Courtesy Flags are used on Vessels when in foreign waters as a sign of peace and respect. Manufactured in best quality polyester bunting. Measures 12 x 18 inches (30cm x 45cm)

1/2 Yard - measures 26cm x 58cm. The international maritime signal flags are a method of communication between either a group of ships or a ship and the land. Each flag represents a letter or a standard assigned concept allowing ships to communicate with one another

 High quality printed Red Ensign flag.

Sizes:

• 1/2 Yard (30cm x 45cm)
• 3/4 Yard (40cm x 68.5cm)
• 1 Yard (46cm x 91.5cm)
• 1 1/4 Yard (58cm x 114.5cm)
• 1 1/2 Yard (68.5cm x 137cm)

 High quality Ensign flag that's individually sewn and not printed.

Sizes:

• 3/4 Yard (40cm x 68.5cm)
• 1 Yard (46cm x 91.5cm)
• 1 1/4 Yard (58cm x 114.5cm)
• 1 1/2 Yard (68.5cm x 137cm)

Cruising Burgee. Manufactured by Holt. Featuring a stainless steel shaft and available in yellow, blue and red. Flag measures 120mm x 110mm.

Dinghy Burgee. Manufactured by Holt. Featuring a stainless steel shaft and available in yellow, blue and red. Flag measures 120mm x 110mm.

The Q Flag is to be flown instead of a courtesy flag until your boat has been properly cleared by customs and immigration. Once this has been carried out it may then be replaced by the courtesy flag. A common practice is to hoist the courtesy flag above the Q flag in anticipation of customs and immigration clearance. Measures 30cm x 45cm

Code flag 'O' Suitable for MOB Flag. Made from polyester. Measures 12" x 9" (30.5cm x 23cm)

Code A Dive Flag. Used to indicate that a diver is down, and that nearby boats should keep well clear at low speed. Manufactured in best quality polyester bunting.

Code Flag 'B' Protest Flag 30 x 45cm. Manufactured in best quality polyester bunting.

Printed polyester signal flag C. Measures 40cm x 30cm. ICS Meaning as single flag: "Affirmative". Meaning when used with numeric complements: "Course in degrees magnetic"

International Marine Signal Flag Meaning as a single flag: "I have a pilot on board.". 30mm x 45mm

Signal flag N on printed polyester. Measures 12" x 18" (30cm x 45cm). ICS Meaning as single flag: "Negative"

 High quality Union Jack flag in sewn polyester. Available in 2 sizes:

• 1 1/4 yard - 58cm x 114.5cm
• 1 1/2 yard - 68.5cm x 137cm

The tempest 12 wind indicator is a lightweight rotating wind indicator. It is ideal for small vessels and dinghys. 

• Weight: 36g
• Height: 300mm
• Mounting Type: Lateral, along the mast
• Rotation System: Axis
• Construction: ABS and Aluminium

 Strong & sturdy - Framework in hard anodised alloy, rotating pivot in stainless steel. Accurate even in a light breeze - Light pointer and tail made of robust UV resistant composite. Visible at night - Fluorescent paint under pointer, tail & arms. Multiple mounting options - Bracket for horizontal or vertical mounting with a stainless steel nilstop & 8mm nut.

 

 

The WINDEX 10 was designed as smaller version of the famous WINDEX 15, which has sold more than one million copies worldwide. The WINDEX 10 is suitable for family or racing sailing boats with mast heights up to 8-9 meters (25-30 feet). Although this is smaller model it retains the famous and superior Sapphire suspension technology, which make is possible to recognize changes in the wind direction as small as one degree. Like all WINDEX models it is extremely sturdy in all wind conditions and it has been wind tunnel tested in speeds up to 80 knots!

WINDEX Wind Direction Indicators offer exceptional performance at the best value of any wind indicator worldwide. The secret is the sapphire jewel suspension bearing allowing the Windex 15 to seek relative wind direction in winds as little as 2/10th's of a knot. It also features a large fin - low inertia vane and easy-to-read, fully adjustable tacking tab system. Reflector tape on the vane and tacking tabs make WINDEX 15 easy to see day and night. WINDEX vanes are sturdy and when installed properly, offer many years of use. They have been wind tunnel tested to wind speeds of 80 knots!

The WINDEX Dinghy is designed for dinghys and smaller sailing boats with the WINDEX quick release attached on the side of the mast. The quick release system allows easy removal of the WINDEX Dinghy without using any tools.

This beautiful socket is rail mounted with minimal visible fixings. A secure and easy way to mount flags to a pushpit rail. 316 Stainless Steel casting. For 1" (25.4mm) Flag Staff. Will mount to rail 20mm or 25mm (1") with insert included.

Stainless steel angled mast support flag socket base. Can take up to 22mm flag pole with a screw knob. Weight: 140g

Stainless steel straight mast support flag socket base. Can take up to 22mm flag pole with a screw knob. Weight: 140g

Chromed flagpole socket. Slightly angled. With 3 screwholes. Base diameter: 56mm. Overall height: 56mm. Flagpole socket diameter: 25mm

Stainless steel flag pole. Diameter: 25mm. Length: 1020mm. Lug Distance: 366mm. Comes with a black cover for when being stored / not in use.

Lahna Top Quality Finish mahogany flagstaff with cleat.. Integral mahogany truck with built-in roller, and wooden cleat. Fits 25mm socket. Finished with special varnish

Brilliant quality pine flag poles available in a range of sizes, all of which have a 25mm end to slot into your flagstaff socket. Complete with small cleat.

Brilliant quality pine flag poles available in a range of sizes. Does not come with cleat.

Spare flag for telescopic IOR dan buoy. Flag measures 45cm x 35cm

Bracket that allows for side, top or front mounting on most masts, boats or dinghies. Made of glass filled polycarbonate, 2 (5 cm) long. Includes stainless steel set screw and (2) #10 self-tapping screws.