HOLT

1.8 metre outboard starter cord. Braided polyester rope designed for hard use. Available in both 4.5mm and 6mm thickness. 1.8 metres length.

Holt Aqua Signal 42mm Warm White 12 LED Bulb. 71LM (6W) 12LED. SV8.5 10-30V DC. Aqual Signal 42mm Bulb

Holt BA9S 12LED Level Pin Warm White Chart Table Bulb. 63LM (6W) 12LED. BA9S 10-30V DC

HOLT Marine Prepack Din 97 Brass Countersunk Woodscrews

Cork gasket material. 300mm x 300mm x 2mm. A compound cork gasket material that's ideal for skin fittings

HOLT Marine Prepack Countersunk Head Allen Key Machine Screws. Grade A4 / AISI 316

Cruising Burgee. Manufactured by Holt. Featuring a stainless steel shaft and available in yellow, blue and red. Flag measures 120mm x 110mm.

Dinghy Burgee. Manufactured by Holt. Featuring a stainless steel shaft and available in yellow, blue and red. Flag measures 120mm x 110mm.

Holt / Nautos 28mm Ball Bearing Single Vertical Footblock. Loads in footblocks can be the highest imposed by sheets. Always be sure of loads when ordering this part. Rope locks are intended to do a temporary job. Do not use high loads as a stopper.

Holt 40mm Autoratchet made with advanced carbon composite cheeks, hard anodised CNC’d aluminium sheave for ultimate grip and wear resistance. The sheave activated ratchet is automatically triggered under load with the embedded spring mechanism in the centre of the block.

This organic block is an original concept that gives near zero friction and heat resistance. It combines composite cheeks with aluminium axle, Delrin sheave and balls. This allows maximum performance in racers up to 32ft.

ORGANIC BEARING SYSTEM - Aluminium large central axle provides a lightweight alternative to the Dynamic. Aluminium dissipates heat build up giving excellent performance.

Holt / Nautos 40mm Web / Tie Sheave Ring

Swivel Stop: An anti swivel head moulding is supplied with the block giving the option to have it - fixed head or swivel. Composite Body: High tensile carbon composite body. Strong and lightweight. Plain Bearing system: Locking tri-rivet head maintains sheave rotation under higher loads. Usage: Mainsheet systems, Control Lines, Sheet Blocks, Vang Cascades, Cunningham Systems, Halyard Leads

Swivel Stop: An anti swivel head moulding is supplied with the block giving the option to have it - fixed head or swivel. Composite Body: High tensile carbon composite body. Strong and lightweight. Plain Bearing system: Locking tri-rivet head maintains sheave rotation under higher loads. Usage: Mainsheet systems, Control Lines, Sheet Blocks, Vang Cascades, Cunningham Systems, Halyard Leads.

Swivel-Stop: An anti swivel head moulding is supplied with the block giving the option to have it - fixed head or swivel. Composite Body: High tensile carbon composite body. Strong and lightweight. Plain Bearing System: Locking tri-rivet head maintains sheave rotation under higher loads. Usage: Mainsheet systems, Control Lines, Sheet Blocks, Vang Cascades, Cunningham Systems, Halyard Leads

Swivel-Stop: An anti swivel head moulding is supplied with the block giving the option to have it - fixed head or swivel. Composite Body: High tensile carbon composite body. Strong and lightweight. Plain bearing system: Locking tri-rivet head maintains sheave rotation under higher loads. Usage: Mainsheet systems, Control Lines, Sheet Blocks, Vang Cascades, Cunningham Systems, Halyard Leads

Swivel-Stop: An anti swivel head moulding is supplied with the block giving the option to have it - fixed head or swivel. Composite Body: High tensile carbon composite body. Strong and lightweight. Plain bearing system: Locking tri-rivet head maintains sheave rotation under higher loads. Usage: Mainsheet systems, Control Lines, Sheet Blocks, Vang Cascades, Cunningham Systems, Halyard Leads

Swivel-Stop: An anti swivel head moulding is supplied with the block giving the option to have it - fixed head or swivel. Composite Body: High tensile carbon composite body. Strong and lightweight. Plain bearing system: Locking tri-rivet head maintains sheave rotation under higher loads. Usage: Mainsheet systems, Control Lines, Sheet Blocks, Vang Cascades, Cunningham Systems, Halyard Leads

Swivel-Stop: An anti swivel head moulding is supplied with the block giving the option to have it - fixed head or swivel. Composite Body: High tensile carbon composite body. Strong and lightweight. Plain bearing system: Locking tri-rivet head maintains sheave rotation under higher loads. Usage: Mainsheet systems, Control Lines, Sheet Blocks, Vang Cascades, Cunningham Systems, Halyard Leads

Holt / Nautos 57mm Ball Fiddle Swivel Port Ratchet Block. Ball bearing ratchet block with aluminium sheave. On-off ability under load.

ORGANIC BEARING SYSTEM - Aluminium large central axle provides a lightweight alternative to the Dynamic. Aluminium dissipates heat build up giving excellent performance.

ORGANIC BEARING SYSTEM - Aluminium large central axle provides a lightweight alternative to the Dynamic. Aluminium dissipates heat build up giving excellent performance.

The Organic block from Nautos is an original concept that allies composite cheeks with aluminium races for near zero friction and heat resistance, allowing maximum performance in racers up to 32 feet.

The Autoratchet is a load-sensing ratchet block that rolls freely in both directions under low loads, and automatically engages the ratchet as loads increase.  Unloaded main and jib sheets run out freely during mark roundings.

Swivel-Stop: An anti swivel head moulding is supplied with the block giving the option to have it - fixed head or swivel. Composite Body: High tensile carbon composite body. Strong and lightweight. Plain Bearing System: Locking tri-rivet head maintains sheave rotation under higher loads. Usage: Mainsheet systems, Control Lines, Sheet Blocks, Vang Cascades, Cunningham Systems, Halyard Leads

Swivel-Stop: An anti swivel head moulding is supplied with the block giving the option to have it - fixed head or swivel. Composite Body: High tensile carbon composite body. Strong and lightweight. Plain Bearing System: Locking tri-rivet head maintains sheave rotation under higher loads. Usage: Mainsheet systems, Control Lines, Sheet Blocks, Vang Cascades, Cunningham Systems, Halyard Leads

Holt / Nautos Aluminium Bearing Cam Cleat

Holt / Nautos Cam Cleat Fairlead. For small (27mm) and large (38mm) cam cleats.

The Holt / Nautos composite cam cleats use advanced metal replacement resin and offer a greater resistance to heat and UV stable. They're lighter and stronger with an improved Jaw profile and vertical pillar design which makes them stronger and easier to release.

The Holt / Nautos composite fairlead - to fit the Holt / Nautos composite cam cleat.

Holt / Nautos Line 28mm Single Fixed Head Block

Holt / Nautos Line 28mm Single Fixed Head Block with Becket

Holt / Nautos Line 28mm Single Fixed Head Block with Becket

Holt / Nautos Line 28mm Single Swivel Block

Holt / Nautos Line 39mm Single Fixed Head Block

Holt / Nautos Line 39mm Single Fixed Head Block with Becket

Holt / Nautos Line 39mm Single Swivel Block

Holt / Nautos Line 57mm Mast Base Clevis Block

Holt / Nautos Line 57mm Single Swivel Block

Holt / Nautos Line 57mm Swivel Ratchet Block - Starboard

Frequently used in all boat sizes, these non friction rings are song, light, safe and have a high resistance. They're made of hard anodized aluminium and have a Teflon® finish.

Holt Needle and Thread Pack which includes 3 Lengths of Different size Thread

Holt 30mm Dynamic Ball Snatch Block. Usage: Twinning Lines, Sheet Tidy, Continuous Furler / Code Zero Take ups

Holt 40mm Bearing Ball Snatch Block. Usage: Twinning Lines, Sheet Tidy, Continuous Furler / Code Zero Take ups

 

 

HOLT Marine Prepack Stainless Steel Hexagon Full Nuts. Din 934. Grade A4 (AISI 316)

Adhesive heat shrink butt. A waterproof heat shrink joint for added strength & security.

Holt 15 LED Offset Pin Navigational and Interior Warm White Bulb. BAY15D. 127LM (11W) 15LED 10-30V DC

HOLT Marine Prepack BAY15D Offset Pin Navigation and Interior Bulb. 300LM (25w) 24 LED 10-30V. Available in Warm White (R700) or Green (R700G)

Holt Offset Pin 36 LED Green, Red and White Navigation Bulb. 325LM (27W) 10-30V DC. BAY15D. Holt Code: R799

Holt Warm White Navigation and Interior 21 LED Bulb. Available in BAY15S (R710) or BAY15D (R715). 279LM (23w) 21 LED. 10-30V DC

Holt Bullseye Fairlead with Stainless Steel Insert. ERGO DESIGN - New ergonomic design reducing accidental line snags. Modern spark finish. FIXING BORES - Allows flush mounting of fasteners with large counter sinks taking a wider variety of fastening. STAINLESS INSERTS - Greater wear resistance with 316 inserts flush fitted.

Holt Deck Bush.

Sold singularly.

Available in 3 sizes:

• HT39 - 9mm I.D.
• HT239 - 12mm I.D.
• HT339 - 15mm I.D.

Holt Deck Bush Push In with Stainless Steel Insert

HT4439
Inside Diameter: 6mm
Fixing Hole Size: 13mm

HT4539
Inside Diameter: 13mm
Fixing Hole Size: 16mm

Holt Deck Bush with Stainless Steel Insert

Holt HT4041 Holt Mast Shroud Tang

Length: 77mm
Width: 16mm
Fix Hold Size: 5mm
Fixing Centres: 11mm

HOLT HT4066. Burgee clip for mast. Stainless steel.

Holt HT455 Stanchion Fairlead

Holt Marine Prepack Insulated Crimp Terminals. Types include ring, butt connector, bullet male, bullet female, male push on, female push on and piggy back. Please refer to the image to see each crimp terminal. Shown is the red (small) range, but blue (medium) and yellow (large) terminals are also available. 

HOLT Marine Prepack Stainless Steel Penny Washers. Grade A4 (AISI 316)

HOLT Marine Prepack A4 Grade / AISI 316 Stainless Steel Split Rings

Holt Marine Prepack Steel Cotter / Split Pins. Grade A4 (AISI 316) Stainless Steel.

HOLT Marine Prepack Brass Nickle Plated Turnbuckles

HOLT Marine Prepack Cable Support Nylon Ties Complete With Screws. Size: 4.6mm wide, 200mm long. Pack Quantity: 6

Holt Marine Prepack Cable Ties

HOLT Marine Prepack ‘P’ clips - cable support clips. Complete with screws.

HOLT Marine Prepack Pull-It-Up Fastenings

HOLT Marine Prepack Replacement Press Stud Kit

HOLT Marine Prepack Rubber Canopy Guy for Boat Covers and Spray Hoods

HOLT Marine Prepack Solid Brass Cup Hooks. Available in 25mm, 26mm and 40mm overall lengths in various pack sizes.

HOLT Marine Prepack Stud and Button Fastenings

HOLT Marine Prepack Teak Dowels. 8mm, 10mm and 12mm pack sizes available.

HOLT Part No: HT52
Inside Diameter: 7mm
Fixing Hole Size: 3mm
Fixing Spacing: 15mm
Weight: 3g

HOLT Part No: HT152
Inside Diameter: 14mm
Fixing Hole Size: 4mm
Fixing Spacing: 25mm
Weight: 8g

HOLT Part No: HT252
Inside Diameter: 19mm
Fixing Hole Size: 5mm
Fixing Spacing: 34mm
Weight: 28g

HOLT Part No: HT452
Inside Diameter: 11mm
Fixing Hole Size: 3mm
Fixing Spacing: 18mm
Weight: 4g

Holt Tube Clips

HOLT Marine Prepack Blade Fuses. Please be aware that these are not sold as a range, but rather each pack contains a quantity of each individual size. 

Holt Pro Lube Spray is a silicone/PTFE super lubricant that is designed specifically for the marine environment. Pro-lube is the answer to every sailors prayers. Ideal for use with luff grooves, sail slides, bat cars, blocks, fittings and rejuvenating old sails.

Holt R750 Flat 12 LED Warm White G4 Bulb. 222LM / 19w 12 LED G4 bulb.

Scotchlok Connector. A simple clip together cable connection. 3 Per pack

The perfect finish for rope ends

Holt Stainless Steel R Clips. 316 marine grade stainless steel.

HOLT Stanchion Lead Block. Designed for standard 25mm stanchions with optimal clamping geometry

Holt Warm White 12LED 37mm / 42mm Festoon Bulb. 90LM (8W) 12LED. SV8.5 10-30V DC. Available in 37mm (R760) and 42mm (R765) lengths

 Strong & sturdy - Framework in hard anodised alloy, rotating pivot in stainless steel. Accurate even in a light breeze - Light pointer and tail made of robust UV resistant composite. Visible at night - Fluorescent paint under pointer, tail & arms. Multiple mounting options - Bracket for horizontal or vertical mounting with a stainless steel nilstop & 8mm nut.

 

 

Vinyl Primer is a quick drying, one-component modified vinyl primer/sealer pigmented with aluminium flakes for added water resistance. Vinyl Primer can be used both for underwater and topside areas. It is an excellent universal sealer, which can effectively seal correctly prepared, intact old antifouling systems.

Jotun Vinyl Primer spray is a one component physically drying vinyl sealer/primer. It is fast drying.

It is pigmented with a high content of aluminium flakes giving good waterproof protection. Gives excellent adherence  to antifoulings. Supplied in a spray can for easy application.

To be used on drives, flaps, propellers and light metal parts below the waterline. Specially designed as preparation for Aqualine antifoulings supplied in a spray can.

With the CL205 the rope drops down into the teeth to give a quick, positive lock that is easy to release. The cleat is manufactured from UV resistant plastic making it cost effective and ideal for holding rope in an outdoor environment.

With the CL209 the rope drops down into the teeth to give a quick and positive lock that is easy to release. The cleat is maufactured from UV resistant plastic, making it cost effective and ideal for holding rope in an outdoor environment.

Holt Marine Prepack Monel Metal Rivets

HOLT Marine Prepack Multicore Solder. 2m length.. Holt Prepack Code: Q870

 

 Neoprene gasket material. 300mm x 300mm x 2mm. A high quality neoprene gasket sheet. Resistant to hydraulic and fuel oil, petrol, kerosene, alcohols, alkalis and dilute acids also flame O-Zone and sunlight.

 

 

Clamcleat CL228 - Vertical with Integral Fairlead. A compact black nylon cleat with integral fairlead to guide the rope into the teeth.

HOLT Open base Fairlead with stainless steel liner.

• Pack of 2, code HT 4282*2
• Weight: 11gm
• Hole centres: 25mm
• Fixing: 4mm
• Opening: 10mm

Outboard Shear Pins. Sold in packs of 2. Please check description for range.

Pack of two splicing needles to cover rope sizes of 3 - 6mm. One for 3 - 4mm ropes and one for 5.5 - 6mm ropes.

HOLT Marine Prepack Plastic Screw Cap Covers and Washers

Gland packing. PTFE Type for shafts.

J021 - 1/2" (6.5mm)
J022 - 5/16" (8mm)
J023 - 3/8" (9mm)

Approx 500mm length.

Left and Right Hands Available. For Protection Whilst Making or Repairing Sails and Ropes

Holt Marine Prepack Silicone Bronze Grip Fast Nails

Splicing needle. Suitable for 2-3mm rope.

HOLT Prepack Marine CSK Head Machine Screws. Din 963 (934 & 125). Grade A4 (AISI 316)