JOTUN

For use with Jotamastic 90 Standard and Aluminium Comp A Tins. 1 Litre

Recommended as a general use thinner for most conventional alkyd or oil based paints.

Alkydprimer is an excellent single pack (oil) based primer undercoat suitable for Steel, Aluminium or Wood above the waterline. It is the recommended undercoat for use with Jotun Pilot 2 and can also used as a topcoat when a matt finish is required.

Jotun Anti-skid is made up of aluminium oxide partcles. Apply as follows: Brush/roll/spray a coat of paint. Sprinkle a layer of anti-skid into the wet film using a sieve of the correct mesh size. When the paint is dry, brush off any loose particles and apply a second coat of paint.

Jotun Easy Gloss is a high quality alkyd topcoat. It has a high gloss finish with very good levelling characteristics. It has excellent gloss and colour retention. It is easy to apply. It is fast drying. It has very good hiding power. To be used as a topcoat for aggresive atmospheric exposure. The product is suitable for both professional and consumer application.

If you know which specific colour you're after then please enter it into the colour choice box when placing your order, else please go to our sister site paintmarine.co.uk to easily find and select your colour choice there.

Jotun Easy Primer is a high quality alkyd primer. It is easy to use and offers very good leveling and hiding power. It is fast drying. Offers very good sanding and filling properties. Suitable for properly prepared aluminium, carbon steel, composite and wooden substrates. Recommended as primer/undercoat for one component yachting topcoats. Suitable for both professional and consumer application.

For use with Hardtop AX Jotun paint.

For use with Hardtop Flexi Jotun paint.

For use with Hardtop XP and XPL Jotun paint.

Jotun Jotafloor Rapid Dry is a single pack alkyd coating. Rapid Dry is a fast drying floor paint and offers a durability that isn't usually associated with alkyd floor paints. It is ideal for floors with light traffic and walkover and is designed for a range of floors with various levels of exposure.

Jotamastic 90 Aluminium is a two component, polyamine cured epoxy mastic coating. It is a surface tolerant, abrasion resistance, high solids, high build product. It is aluminium pigmented for improved barrier effect. Jotamastic 90 give excellent corrosion protection in both salt and fresh water. It is available with different hardeners (component B) for varying substrate temperatures, Standard (Std) and Wintergrade (WG). If being applied by airless spray it is essential to thin the paint by up to 10% using Jotun Thinners 17

Jotamastic 90 is a two-component, polyamine cured epoxy mastic coating which is a surface tolerant, high solids, high build product. Fully tintable in a wide range of colours, it is specifically designed to provide lasting protection in high-corrosive environments and can be used as a primer, mid or top coat. It is available with different hardeners (component b) for varying substrate temperatures, Standard (Std) and Wintergrade (WG).

For use with Jotamastic 90 Standard and Aluminium Jotun Paints instead of the Standard Comp. B when substrate temperatures are under 10C.

Penguard Clear Sealer is a two-pack, transparent epoxy sealer with excellent penetrating properties. Recommended to be used as a sealer/primer on concrete and other masonry surfaces as part of a suitable protective coating system.

Component B tin for use with all Penguard Jotun paints

Penguard HB is a high build, two-pack pure epoxy primer that be used above and below the waterline. It has excellent adhesion to GRP and should be used when painting over the gelcoat for the first time. It is extremely water resistant and will help prevent osmosis and has excellent adhesion to steel, aluminium, bronze, wood (marine ply) and galvanised steel.

Solvent thinner. Recommended thinner for polyurethane or similar paint products.

Solvent thinner. Recommended thinner for epoxies and similar paint products

Solvent thinner. Recommended as a general purpose thinner for acrylic and chlorinated rubber paints and antifouling compositions.

Vinyguard Silvergrey 88 is a quick drying, modified single pack vinyl primer / tie coat for most applications above and below the waterline. It is very water resistant and recommended to use as a tie coat or as a sealer to an unknown or unsound antifouling / paint system. Vinyguard can be used as a primer / touch up primer under Alkyd and acrylic coatings for wood and steel. Available in both silvergrey colour and red-toned colour.

Jotun Clipper II is a premium clear alkyd based wood oil/varnish. It contains UV-filter. Used together with Clipper I it makes a good system for surface treatment for wooden boats. Clipper II has good water and wear resistance and provides good flexibility. It is fast drying. Clipper II can be used on all wooden surfaces above the waterline.

Jotun Mare Nostrum is from the Jotun Yachting Range. Mare Nostrum is an efficient selfpolishing antifouling based on special binders, assuring an active surface continuously renewed. The result is a clean hull for the whole season.

Ravilakk is a clear, high gloss boat varnish that is easy to apply with exceptional levelling and gloss retention. It is specially designed with tung oil to give it exceptional flexibility and hardness. Ravilakk is both durable and water resistant, giving woodwork a fine golden tone and long lasting gloss finish that enhances the natural beauty of wood. This varnish can be used for woodwork both above and below deck.

Penguard Tow Temp Additive is an additive for improved low temperature curing of the following products: Penguard HB, Penguard Primer, Penguard Special.

Classic colours are used across the globe! This Jotun manufactured and branded fan deck guide contains completely accurate colour examples of 215 RAL K7 Classic colours. Each colour example is shown with its code and name in German and contains lists of all colours at the front in languages English, French, Spanish, Italian, Dutch, Russian and Chinese.