Marine Sealants

Sikaflex 291i is a multi-purpose marine adhesive / sealant and bedding compound. It has a wide adhesion range and excellent shock absorbing and vibration dampening properties. It is resistant to weathering and seawater.

A solvent-based, colourless cleaning agent for painted substrates and plastics. Sika® Remover-208 is primarily used to pre-clean strongly contaminated non-porous substrates. It can also be used to remove uncured excess of Sikaflex® adhesive or sealant from application tools or soiled surfaces.

Sikaflex 291i is a multi-purpose marine adhesive / sealant and bedding compound. It has a wide adhesion range and excellent shock absorbing and vibration dampening properties. It is resistant to weathering and seawater.

TIKALFLEX contact 12 is a shrink-free, very strong, weatherproof MS polymer adhesive for all kinds of bonding assignments in the maritime or mobile environment. This MS polymer adhesive is suitable for permanently elastic, fixed, vibration-resistant bonds, can be used to compensate tolerances and can be sanded when cured. Contact 12 can be used for applications above and below water. It hardens on exposure to humidity, can be coated with normal varnish after hardening and shows good resistance to nitric acid, caustic soda, oil and diesel.

TIKALFLEX contact 12 is a shrink-free, very strong, weatherproof MS polymer adhesive for all kinds of bonding assignments in the maritime or mobile environment. This MS polymer adhesive is suitable for permanently elastic, fixed, vibration-resistant bonds, can be used to compensate tolerances and can be sanded when cured. Contact 12 can be used for applications above and below water. It hardens on exposure to humidity, can be coated with normal varnish after hardening and shows good resistance to nitric acid, caustic soda, oil and diesel.

Bostik Simson Construction Adhesive is single component MS Polymer adhesive which has fantastic sealing and bonding characteristics. Bostik Simson Construction Adhesive is very surface tolerant and has excellent UV resistance.

Sikaflex 290 DC is a 1-component, UV-resistant, polyurethane based joint sealing compound specially formulated for caulking joints in traditional marine timber decking

Geocel Marine Silicone Sealant is a silicone rubber sealant that fills and caulks gaps, joints and cracks around the boat. It is suitable for sealing joints where pipes or trunking for machinery pass through decks or bulkheads, and for sealing around hatches, port holes and windows, where a watertight flexible seal is required.  

Geocel Silicone Sealant Remover is a gel for removing unwanted cured silicone sealant. Making it ideal for the refurbishment of sanitary ware, door or window frames, worktops etc. It is also suitable for removing cured silicone where product has been misapplied.

Captain Tolleys is the ultimate surface sealant, its easy application method and numerous attributes make it the sealant of choice for boaters today. Creeping Crack Cure is a multi purpose sealant, It is thinner than water so is able to manipulate its way into the smallest of cracks and joints where other sealants aren't able to reach. You do not even need to remove any old sealant, simply apply creeping crack cure along the line of a crack and when no more is absorbed, your leak is sealed.

Cork gasket material. 300mm x 300mm x 2mm. A compound cork gasket material that's ideal for skin fittings

 Neoprene gasket material. 300mm x 300mm x 2mm. A high quality neoprene gasket sheet. Resistant to hydraulic and fuel oil, petrol, kerosene, alcohols, alkalis and dilute acids also flame O-Zone and sunlight.

 

Traditional linseed oil based putty for external single glazing into primed softwood, hardwood frames and steel. Requires a protective paint system. Not recommended for use with micro- porous coating

LOCTITE® 5926 is a multi-purpose flexible silicone sealant and cures on exposure to moisture in the air to form a tough rubber gasket. This product resists aging, weathering and thermal cycling without hardening, shrinking or cracking. Typical applications include valve covers, timing gear covers, differential covers, oil pans, transmission pans, water pumps, and thermostat housings.

Cartridge Length: 225mm (10"). Overall Length: 370mm. Material: Steel