White Nylon BSP Threaded Skin Fitting
The KM fittings below are moulded in off white Nylon, a strong, stable material unaffected by extreme temperature. These fittings represent high quality at a very competitive price.
3 in stock
A plumbing system that you can rely on is always a must for peace of mind when you're out on your boat. Bayside Marine stocks a huge range of fittings in a number of sizes from quality supplier Aquafax in a variety of materials that'll ensure everything is water tight.
The KM fittings below are moulded in off white Nylon, a strong, stable material unaffected by extreme temperature. These fittings represent high quality at a very competitive price.
3 in stock
0 in stock
10 in stock
Maestrini threaded skin fitting made from bronze. This material is tough and corrosion resistant making it suitable for exposure to sea water. A skin fitting connects to a threaded pipe and is designed for through hull applications. This skin fitting features an inclined head style to create less drag and is supplied with a bronze fixing nut. Inside there are two internal lugs for securing (see images)
Currently only 19mm size available. We do stock other bronze skin fittings that do not have the internal lugs which can be found here.
0 in stock
DZR / CR Brass Skin Fitting BSP Thread with Hose Tail. Corrosion Resistant (CR), Dezincification Resistant Brass (DZR)
0 in stock
1 in stock
1 in stock
4 in stock
6 in stock
4 in stock
TruDesign Load Bearing Collars are designed for use with TruDesign Skin Fittings and Ball Valves.
With the Collar in place, the Skin Fitting-Ball Valve-Hose Tail assembly will withstand a 500 lb (227 kg) static force applied to the Hose Tail end of the assembly, for a minimum of 30 seconds – complying with North American ABYC H-27 standards.
Small collar to fit 3/4" and 1" ball valves. Medium collar to fit 1 1/4" and 1 1/2" ball valves.
2 in stock
3 in stock
2 in stock
4 in stock
Nitrile washers for fitting over male BSP threads as on tank fittings male threaded hose connections etc. Thickness approx. 3mm. Suitable for water or oil.
6 in stock
BSP Male Thread Taper: up to 2" Parallel: over 2". BSP Parallel Female Thread.
1 in stock
10 assorted copper washers. Contains:
1 in stock
10 in stock
Screws very easily onto your female-threaded connection to give you a 3/4" hose tail. Made from brass and includes a rubber o-ring seal on the hose tail and a rubber washer inside to prevent any leakages when in use.
3 in stock
Hose Tail 1/4 NPT Fitting for Moeller fuel valve. Offered in brass. Allows for a flexible fuel line to be connected to existing 'American' NPT tapped threads in hose tanks, blocks etc
3 in stock
Please note that this hose is sold per metre. For example, if a quantity of 4 is selected then a 4 metre length will be cut and dispatched. Transparent plasticised PVC hose reinforced with high tensile polyester fibres. low toxic, abrasion, ozone and weather resistant. Applications: Gardening, irrigation, and general water discharge and low pressure airlines. Made with FDA approved ingredients and is suitable for food & water applications.
29 in stock
22 in stock
For conveying liquids, air, light chemicals, oil, detergents and many other liquids including potable water. Also used as suds pipes and protection and decoration of metal tubes, wooden dowelling and yacht rigging. Under most conditions it is suitable for use with oils, greases and solvents. Made with FDA approved ingredients and is suitable for food applications.
Sold per metre. For example, if a quantity of 4 is ordered then 4 metres will be cut and dispatched
18 in stock
26 in stock
38 in stock
21 in stock
1 in stock
5 in stock
Nylon Plastic Straight Hose Connector. These Fittings have barbed ends for hose. Sizes 3/8", 1/2" and 1/2"-3/8" connectors are black.. Sizes 3/4", 1", 1 1/4", 1 1/2" and 2" connectors are white.
4 in stock
13 in stock
The fitting has barbed ends for hose. Sizes up to 3/4" are moulded in polypropylene. 1" hose connector is plastic. Image is for illustrative purposes as colour and design may vary.
4 in stock
16 in stock
0 in stock
BSP hose connector. Made from GRPP. Hose size given is for the internal diameter of the hose.
4 in stock
5 in stock
3 in stock
1 in stock
1 in stock
1 in stock
6 in stock
Female to Female Brass Elbow BSP. 90 Degree Elbow (Female to Female). BSP Parallel Female Threads
4 in stock
2 in stock
Male / Female Brass 90 degree pipe connection elbow made from brass. A 90° elbow is used to connect two pieces of equal sized pipe at a right angle.
BSP thread fitting. Please refer to the attached guide to work out which size is right for you.
4 in stock
BSP Male or Female thread. Join them to make connectors for different size hoses!
0 in stock
2 in stock
3 in stock