Pump Accessories

Dimensions: 105mm long, 40mm wide, 110mm high (at max. lift). Maximum Current: 14 amp. For automatic on/off bilge pump control. Switch design prevents rapid on/off cycling.

 

 

Dimensions: 120mm long, 60mm wide, 90mm high. Maximum Current: 20 amp. For automatic on/off bilge pump control. Fully integrated, impact resistant cover.

This float switch uses a corrosion reistant stainless steel ball-lever switch, and operation is not impeded if water does happen to penetrate into the casing.

Seaworld float switch guard cover for the Seaworld float switch

The Water Witch 101, electronic bilge pump switch, is a small and versatile replacement for the commonly used float switch. The Water Witch 101 offers one of the easiest installations possible with its new tab design. Temperature, humidity, or electrical noise will not affect this switch.

Fresh Water Pump Inlet Strainer - 9.5mm (3/8") Hose. Protects all electric diaphragm pumps

Fresh Water Pump Inlet Strainer - 15mm (1/2") Hose. Protects all electric diaphragm fresh water pumps

The Seaflo Seawater filter is a filter directly filter water suspended solids, particles and other impurities with a filter net, to reduce dirt, bacteria algae, rust, etc. in a pipe system, in this way to protect the pipe system and equipment and make them work properly.

Fresh Water Pump Inlet Strainer - 19mm (3/4") Hose. Protects all electric diaphragm pumps

Fresh Water Pump Inlet Strainer - Threaded. Protects all electric diaphragm fresh water pumps

Fresh Water Pump Inlet Strainer with Hose Connection. Protects all electric diaphragm fresh water pumps

Whale Strumbox is fitted at the end of the suction hose, a strum box prevents the hose from picking up debris from the bilge. Allows maximum amount of water to be pumped from the bilge. Suitable for 1 " (25 mm) and 1-1/2" (38 mm) hose

Whale Strum Box fitted at the end of the suction hose, a strum box prevents the hose from picking up debris from the bilge. Allows maximum amount of water to be pumped from the bilge. Fitted non-return valve prevents drainback. Removable strainer for easy cleaning. Suitable for 1 " (25 mm) and 1-1/2" (38 mm) hose

WHALE SB3422 3/4" (19mm) Strainer with Multi-Directional Port and Non-Return Valve. Multi directional port is easily adjustable for side or top entry. For 19mm connection. Suitable for deep inside the Bilge. This product is designed for use with water.

Whale In-Line Non-Return Check Valve for 3/4" to 3/4" / 1" Hose Connections. Provides an easy way to maintain prime in a suction or discharge line. Designed to fit in-line. Suitable for use with manual or electric pumps

Whale Plastic In-Line Non-Return Valve for 1" or 1 1/2" Hose Connections. Provides an easy way to maintain prime in a suction or discharge line. Designed to fit in-line. Suitable for use with manual or electric pumps

One Way Hose Connector made from sturdy polypropylene.  A built in rubber flap allows water to flow in one direction only.  Each section can be cut down to size of hose barb required. The material inside is name from nitrile rubber, or NBR. These valves are not suitable for any system that uses chlorine.

TruDesign Non-Return Valves (Check Valves) are made from UV stabilised glass reinforced Nylon, these composite material fittings are designed for the harsh marine and agricultural environments. They can be used in line to prevent water backflow or siphoning and have a very low cracking pressure. Sizes given are for internal diameter hose sizes.

1/2" Non-Return Chromed Brass Foot Valve for 1/2" (13mm) Hose Connection. Ideal for use with electric submersible pumps

This is a new Water Manifold and has been carefully designed to reduce the weight and cost associated with traditionally fabricated water system manifolds. The complete Y-Piece operates with hose sizes of 3/4", 1" and 1 1/2" and is designed to simply cut it down to size.

Plug to Suit 1 1/4" (38mm) BSP Waste

The waste water sink outlet plug suits waste water sink outlets which require a 22mm (7/8") outside diameter plug.

Chromed Plastic Hand Shower with Trigger. The shower has two positions. The trigger can be held in for a short, manual flow. The trigger can also be pulled back for a hands free, permanent flow.

The shower has two positions. The trigger can be held in for a short, manual flow. The trigger can also be pulled back for a hands free, permanent flow.

Johnson F4 Pump MC97 Impeller 09-1026B-1. Original impeller kit contains Johnson Pump Original Impeller, gasket, glycerine and manual.

Plastic body with either plastic or S/S top c/w rubber washer, plug extra, sink aperture 1" 

Straight, plastic body with stainless steel top c/w washer and plug designed for 1½" aperture 3/4" ID hose.

Made of strong thermoplastic material. White colour. Resistant at 30deg below zero. Suitable for life rafts. Length: 20cm. Weight: 120g 

Efficiently removes fumes from bilges or engine room. Strong ABS Housing with barbs to eliminate hose clamps.

One Way Check Valve - FV1227. For 13mm (½") flexible hose (white). Fit in line to maintain prime for short periods 

Y'-Valves are an essential piece of equipment when the flow of water or other fluids are required to be conveniently diverted, as in a marine head application where a holding tank is utilized. They are easily mounted to a bulkhead. The valves are operated by a simple 120 degree movement. Positive stops are provided between positions.

Legislation in many countries dictates the use of holding tanks near shore, or in defined areas. By installing a diverting valve (Y Valve), the user has the choice to divert black water to a holding tank or directly overboard when circumstances allow.

Straight White Shower Head. Chrome plated top. 1⁄2'' BSP(M) Thread. 150mm length.

WHALE AS0511 Spare Handle Assembly for Henderson Mk 5 Pumps. Complete with lanyard.

Moulded in Marelon. Flange mounting. 1 1/2" Barb. Projection 60mm. Suitable for up to 80 P.S.I. Flange Dia 89 mm

Universal Shower Head White Cover. Lid clicks into place to protect and cover your shower head. Fits both angled & straight shower heads

Jabsco 58109-1000 Non Return Valve Assembly Kit. Complete with Joker Valve pre-installed. Fits 38mm ID hoses.

AS8680 Whale Assembly Spare Handle S/S 240mm + Lanyard. For BP9021 Urchin pump