Pumps

Orca Family - compact and powerful electric bilge pumps designed to be installed deep in the bilge. Compact powerful submersible electric bilge pumps - with large filter base to ensure maximum surface area exposed to bilge water.

SEAFLO non-automatic bilge pumps offer water evacuation activated by a panel or float switch. Our larger impeller design and more robust motor allow us to outperform our competitors. Our removable strainer base fits industry standard mounting conventions though, so you'll have no problem changing to us from them.

SEAFLO non-automatic bilge pumps offer water evacuation activated by a panel or float switch. Our larger impeller design and more robust motor allow us to outperform our competitors. Our removable strainer base fits industry standard mounting conventions though, so you'll have no problem changing to us from them.

SEAFLO non-automatic bilge pumps offer water evacuation activated by a panel or float switch. Our larger impeller design and more robust motor allow us to outperform our competitors. Our removable strainer base fits industry standard mounting conventions though, so youll have no problem changing to us from them.

SEAFLO non-automatic bilge pumps offer water evacuation activated by a panel or float switch. Our larger impeller design and more robust motor allow us to outperform our competitors. Our removable strainer base fits industry standard mounting conventions though, so you'll have no problem changing to us from them.

All-in-one pump & switch-No float switch required Pump turns on when water level rises & shuts off when water is removed. Will not pump oil - straight motor oil that enters the bilge will not turn the pump on.

Submersible pump 12 volt DC with 750mm cable and Rule 35A Float Switch

Rule 360 Submersible 24DA. Submersible pump 12 volt DC with 750mm cable.

Rule 500 Submersible 25DA. Submersible pump 12 volt DC with 750mm cable.

Rule Fully Automatic 500 Submersible 25SA. Submersible pump 12 volt DC with 750mm cable.

Rule 1100 Submersible. Model Number: 27DA. Submersible pump 12 volt DC.

Rule LoPro Submersible Pump. Non Automatic low profile 900gph / 3407lph. Submersible pump 12 volt DC.

Rule LoPro Submersible Pump. Automatic low profile 900GPH / 3407LPH. Submersible pump 12 volt DC.

 Fully automated bilge pump with integral sensor. Back up feature to prevent dry running if sensor is fouled, pump reverts to 2.5 minute cycle mode. Compact pump for smaller vessels.

 

 

The Water Witch 101, electronic bilge pump switch, is a small and versatile replacement for the commonly used float switch. The Water Witch 101 offers one of the easiest installations possible with its new tab design. Temperature, humidity, or electrical noise will not affect this switch.

The 21-Series Pumps are compact and designed for a wide range of applications including liquid transfer, spraying, circulation, filtration and dispensing. The 21-series of diaphragm pumps are self-priming and can be run dry without harm. It provides up to 1.2 gallons per minute. Miniature multi outlet water pressure pump serves 1 or 2 3/8" (10 mm) outlets at any one time. This compact automatic demand water system pump has a built-in pressure switch, which automatically starts and stops the pump when faucet is opened and closed.

The 33-Series is our general-duty on-demand positive displacement pump. It provides reliable performance in high water flow, moderate pressure applications. This 3-chamber diaphragm pump provides up to 3.0 gallons per minute and is capable of self-priming up to 6vertical feet, and can run dry without damage.

The 41-Series pump provides high volume water flow with reduced pump cycling, thanks to the quad chamber diaphragm and internal bypass. These models are designed to run on water systems with no accumulator tank necessary, and up to five outlets. It is also suited for use with a holding tank water system, as may be found in a boat, RV or remote cabin. It provides up to 4.5 gallons per minute, suitable in a system of up to five fixtures.

Rule iL200 Pump 12V Centrifugal submersible and inline pump

iL200 Plus Pump 12V

Centrifugal submersible and inline pump

iL280 Plus Pump 12V

Centrifugal submersible and inline pump

Rule iL500 Plus Pump 12V Centrifugal submersible and inline pump

Efficient, high-flow, self-priming pump serving 2 or more outlets. Multi-diaphragm design self primes to 1.8m vertical lift, can run dry without damage. Supplied with snap-in ports for hose 1/2" (13mm) and Strainer. Quiet running. Motor protected by automatic thermal overload cut-out. Includes bypass feature to provide smooth, quiet flow.

Water Pressure Pump WPS 3.5 12V. Water pressure pump 12V with capacity 13,2l/min (3,5GPM). For continous supply of pressurized water on demand. Cut off pressure 2,8 bar (40 psi). Extra heavy duty sealed pressure switch, smooth and pulsation free flow, quiet operation. Serve up to 3 outlets. Easy to install with quick connect ports for 1/2 hose, inlet strainer 40 mesh included. Fuse size 10A.

Manual bilge pump made from non-corrosive materials. Barbed inlet and outlet nozzles accommodate 25mm hoses. Surface or thru-deck mount, with a fixed handle. Up to 10 litres of water per 30 strokes in one minute.

 Three mounting options. A design that has been tried tested and trusted by sailors for decades. This clever bilge pump design allows great versatility in installation so that you can fit the pump in the orientation to best suit your boat. Whale’s most versatile high performance pump design. 3 mounting orientations, 1 pump (on-deck, thru-deck, on-bulkhead)

 

 

Reliable manual black waste pump designed for toilet flush and holding tank pump out. Designed to ensure total reliability in black waste pump out. Totall sealed unit ensures no nasty odours.

Whale Gusher manual galley pumps are truly design classics. Since the 1960s these manual pumps have been designed, refined and manufactured by our skilled UK based workforce.

Whale Tip Toe Pump Fits neatly in the floor and when not required, the plunger beds down neatly with the floor.

Whale's manual galley pumps are truly design classics. Since the 1960s these manual pumps have been designed, refined and manufactured by our skilled UK based workforce. Narrow mounting base allows installation for use between two sinks.

Whale Flipper Mk 4 Manual Galley Pump. GP0418. Whale manual galley pumps are truly design classics. Since the 1960s these manual pumps have been designed, refined and manufactured by our skilled UK based workforce. Whale Self priming Lever operated hand pump.

Trem hand bilge pump. 55cm long. 50mm diameter. Comes complete with extension hose and an adaptor.

 Manual Hand Pump. Portable lightweight design. Can be used to tranfer diesel. Ideal for bailing out smaller boats e.g. dinghies & kayaks.

• Short pump: Approx. 480mm in length.
• Long Pump: Approx. 690mm in length.

 Available in 600 & 750 GPH (2271 & 2838 LPH). Removable mesh filter allows easy cleaning. Clear screw-down cover. Check valve on outlet. Ignition protected. Handles waste water from more than one tapping points. Easy installation . Multiple inlet ports for versatile usage.

 

Manufactured from plastic, the pump is a useful item for transferring a wide variety of inert liquids

 For use with a 12v vehicle power socket or any portable 12v power source. Powerful water flow with adjustable pressure knob. Durable, lightweight and portable. 5m power cable and 2m shower hose. Electric pump with on/off switch. Supplied with suction cup or hook for hanging, shower head bracket & handy waterproof storage bag.

 

 

Whale GP4618 is a simple hand operated solution for pumping water in the galley! Robust secure clamp ring also ideal for quick maintenance. Straight forward plumbing connection for 13mm (1/2") flexible hose. Robust one piece moulded base. Compact design ideal where space is limited. Comfortable to use angled design.

Since the 1940s Whale engineers have refined our manual bilge pump designs and completed extended life testing - the result? Whale's iconic manual bilge pump range. Manufactured by hand using high grade materials and drawing on more than 60 years experience.

The V-pump exploits the extraordinary Venturi effect to help you empty water from your pond, pool, bilges, or dinghy, using only pumped water as its power source - no batteries, no mains power, no moving parts.

The Livewell / Baitwell 90 degree pumps are built on SEAFLOs unsurpassed quality and leadership in pump design and technology. The innovative design includes many new and exciting features including: a quick,one hand push button motor cartridge removal system and threaded nylon hose barb attachments which allow for various hose mounting options. Other features include a built-in dual port option, water-cooled housing and positive snap motor cartridge locking mechanism. Pumps are  are fitted for transom or seacock mounting options.

This Seaflo baitwell pump is built for the serious angler. Our pumps fill your livewell tank with clean, oxygenated water to keep your catch fresh. Our cartridge design allows you to access the motor and the impeller without the need to replumb your system. Comes with all accessories needed to install, including sealing nut and washers.

Whale's long life diecast alloy range - robust designs for extreme conditions. Install Gusher 10 for the long haul.