RULE

Rule 1100 Submersible. Model Number: 27DA. Submersible pump 12 volt DC.

Controls any pump equipped with an automatic float switch. This unit features a black plastic panel. It has a built-in fuse holder and an internally lighted rocker switch with 3 positions (automatic, off, or manual) with the Rule "fail-safe" spring return to "off" from the "manual" position.

Submersible pump 12 volt DC with 750mm cable and Rule 35A Float Switch

Rule 360 Submersible 24DA. Submersible pump 12 volt DC with 750mm cable.

Rule 500 Submersible 25DA. Submersible pump 12 volt DC with 750mm cable.

Rule Fully Automatic 500 Submersible 25SA. Submersible pump 12 volt DC with 750mm cable.

Dimensions: 120mm long, 60mm wide, 90mm high. Maximum Current: 20 amp. For automatic on/off bilge pump control. Fully integrated, impact resistant cover.

Rule 3-Way Panel Switch. Model 45. 12 / 24 / 32v. The "manual" position has a "fail-safe" spring return to "off" so you can't leave your pump running by accident. Black stainless steel panel. Measures approx 57mm x 52mm

Rule LoPro Submersible Pump. Non Automatic low profile 900gph / 3407lph. Submersible pump 12 volt DC.

Rule LoPro Submersible Pump. Automatic low profile 900GPH / 3407LPH. Submersible pump 12 volt DC.

 Fully automated bilge pump with integral sensor. Back up feature to prevent dry running if sensor is fouled, pump reverts to 2.5 minute cycle mode. Compact pump for smaller vessels.

 

 

iL200 Plus Pump 12V

Centrifugal submersible and inline pump

iL280 Plus Pump 12V

Centrifugal submersible and inline pump

Rule iL500 Plus Pump 12V Centrifugal submersible and inline pump

Rule iL200 Pump 12V Centrifugal submersible and inline pump

Dimensions: 105mm long, 40mm wide, 110mm high (at max. lift). Maximum Current: 14 amp. For automatic on/off bilge pump control. Switch design prevents rapid on/off cycling.