Screws, Nuts, Bolts etc

HOLT Marine Prepack Stainless Steel Hexagon Full Nuts. Din 934. Grade A4 (AISI 316)

HOLT Marine Prepack Stainless Steel Penny Washers. Grade A4 (AISI 316)

HOLT Marine Prepack Din 7972 A4 / 316 Stainless Steel Countersunk Self Tapping Screws. Din 7972. Grade A4 (AISI 316)

HOLT Marine Prepack  Stainless Steel Pan Head Machine Screws. A4 AISI 316 Grade. Din 85

HOLT Marine Prepack Stainless Steel Nyloc Nuts. Din 985. Grade A4 (AISI 316)

Barton Split Rings. Available in packs of 6. 10mm / 14mm

HOLT Prepack Marine CSK Head Machine Screws. Din 963 (934 & 125). Grade A4 (AISI 316)

HOLT Marine Prepack A4 / 316 Stainless Steel Dome Nuts. Grade A4 (AISI 316)

HOLT Marine Prepack Flat Stamped Washers. Din 125. A4 / AISI 316 Grade stainless steel

HOLT Marine Prepack POZI Countersunk Self Tapper Screws. Din 7982. Grade A4 (AISI 316)

Countersunk Slotted Machine Screw. A4 316 Marine Grade stainless steel

HOLT Marine Prepack Stainless Steel Pan Head Self Tapper Screws. Din 7971. Grade A4 (AISI 316)

HOLT Marine Prepack Stainless Steel Hex Head Coach Wood Screws. Din 571 Grade A2 (AISI 304)

HOLT Marine Prepack Countersunk Head Allen Key Machine Screws. Grade A4 / AISI 316

The patented Holdon® Midi Clip is a great product designed specifically to grip up to 6mm thick fabrics and included with a quick release mechanism. Its ideal for retail sales, being the ultimate tarp clip. Its performance and appearance makes it perfect for camping, marine use, general DIY, garden applications and stage/TV events and it perform equally well on hemmed or on non hemmed fabric, i.e as tarp clips, banner eyelets, backdrop grommets etc.

HOLT Marine Prepack A4 Grade / AISI 316 Stainless Steel Split Rings

HOLT Marine Prepack Hexagon Head Set Screws with nut & washer. Din 933 (934 & 125). Grade A4 / AISI 316 Stainless Steel

HOLT Marine Prepack Stainless Steel Spring Coil Washers. Din 127. Grade A4 / AISI 316

HOLT Marine Prepack Din 315 A4 / 316 Stainless Steel Wing Nuts. Din 315. Grade A4 (AISI 316)

Holt Marine Prepack A2 Stainless Steel Cup Washers

HOLT Marine Prepack Din 97 Brass Countersunk Woodscrews

Holt Marine Prepack Steel Cotter / Split Pins. Grade A4 (AISI 316) Stainless Steel.

HOLT Marine Prepack Stainless Steel Hexagon Head Bolt with Nut and Washer. Din 931 (934 & 125). Grade A4 (AISI 316)

HOLT Marine Prepack Plastic Screw Cap Covers and Washers

Holt Tube Clips

These U-Bolts are manufactured from marine grade stainless steel and so are ideal where presentation is important and reducing any risk of rust or discolouration is key.

Holt Stainless Steel R Clips. 316 marine grade stainless steel.

Stainless Steel Long Shank Fully Threaded Eyebolt

White Plastic nylon C-Clip

Stainless steel P clip. Used to hold a hose / tube / pipe securely, then screwed into place.

316 Stainless Steel Eye Screw

Available in sizes M6, M8, M10 and M12.

Brass sail eyelets and washers reinforce and strengthen perforations in fabrics. These kits are ideal for maintaining and repairing boat covers, canopies, sails, tarpaulins etc. Made in Brass with polished / self coloured finish. Check full description below for pack sizes and contents.

Galvanised eye bolt. Comes with bolt and washer.

HOLT Marine Prepack Brass Nickle Plated Turnbuckles

HOLT Marine Prepack Cable Support Nylon Ties Complete With Screws. Size: 4.6mm wide, 200mm long. Pack Quantity: 6

Holt Marine Prepack Cable Ties

HOLT Marine Prepack ‘P’ clips - cable support clips. Complete with screws.

HOLT Marine Prepack Pull-It-Up Fastenings

HOLT Marine Prepack Replacement Press Stud Kit

HOLT Marine Prepack Rubber Canopy Guy for Boat Covers and Spray Hoods

HOLT Marine Prepack Stud and Button Fastenings

Lay down paddle clip. Lays flat on deck when not in use

Holt Marine Prepack Monel Metal Rivets

Holt Marine Prepack Silicone Bronze Grip Fast Nails

316 Grade Stainless Steel. Spring loaded mechanism locks the pin in either open or closed position. The head features an angular groove for attachment of a retaining wire.

PRESS STUD KIT FOR FABRIC TO FABRIC APPLICATION

• 10 x 15.2mm Ø buttons. (Ligne 24)
• 10 x Sockets
• 10 x Studs
• 10 x Eyelets
• 1 x set of closing tools
• Stainless steel

Press Stud Fastener Kit for fabric to wood application

• Stainless Steel
• 10 x 15.2mm Ø buttons (Ligne 24)
• 10 x Socket
• 10 x Studs with
• 10mm Screw
• 1 x set of closing tools

YS Anodised Aluminium Dropnose Pin - 8 x 120mm