SEASURE

Seasure 1/2 Back Flap Hinge. Superbly engineered stainless steel hinges with welded hinge pins. Available in 4 different sizes

Seasure Flat Eye Plates. These range of eye plates are manufactured from top grade AISI 316 stainless steel. They undergo multiple machining and finishing operations to ensure they have a smooth finish and are free of damaging sharp corners and burs.

50mm stainless steel webbing slideAvailable as a standard slide or as a 3 bar

Fabricated in 316 stainless steel and electro-polished for a long lasting high finish. The anti-rattle hasp and staple is designed for those who would like to get some sleep on their boat. The staple is fitted with pads to give it a unique anti-rattle feature.

Backing plate for Stanchion Clips. Available for the 1" (25mm) and 1.25" (32mm) stanchion clips.

• Screwhole to Screwhole distance for 1" stanchion clip backing plate: 51mm
• Screwhole to Screwhole distance for 1.25" stanchion clip backing plate: 62mm

Seasure Fixed Mast Plate Available in 2 different sizesmanufactured from top grade AISI 316 stainless steel

Stainless Steel Chain Hook. Available to suit 6mm, 8mm and 10mm chain diameter

Chrome Stub Hinge. Manufactured by Seasure

The Tiller Lock consists of a sheave and lever cam with a toothed slider mounted in a block which is fitted beneath the tiller. The rope is fitted across the after part of the cockpit with a means of keeping it under tension. When locked on to the rope the toothed slider prevents the tiller from moving in either direction. Releasing the lock (by turning the lever to port) immediately frees the tiller and allows the rope to ride freely over the sheave for manual steering. In an emergency or when the device is not required, the rope can easily be snapped out of the block by a downward pull, clearing the tiller.

The Sea-Sure range of eye plates are manufactured from 316 Stainless Steel and undergo multiple machining and finishing operations to ensure they have a smooth finish and are free of damaging sharp corners and burs. They are then electro polished to give them as much resistance to the marine environment. 

Manufactured from electro polished 316 stainless steel for a long, corrosion-free life. The flexible bracket can be used in places where crew may stand on them or where reduction in noise inside the boat is required.

Halyard Lock for Dinghies. For dinghies with external halyards.

Hole Pitch: 12.7mm
Hole Diameter: 5mm

Nylon Inglefield Hook. Available in black or white. These are ideal for securing covers and are prevented from disappearing into cord runs by the novel fish-tails.

Nest Plates for Flat Eye Plates. These Nylon Nest Plates are used to be put behind the eye plate to protect the surface from the steel.

The Seasure range of deck eyes are manufactured from top grade AISI 316 stainless steel. They undergo multiple machining and finishing operations to ensure they have a smooth finish and are free of damaging sharp corners and burrs.

Pack of 2 Spar Eyes to fit Curved Pole. Curved base will fit 25 or 32mm diameter poles. Overall height: 27mm

Pack of 4 Heavy Duty Short Lacing Hooks

Hole Pitch: 12.7mm
Hole Diameter: 4mm
Overall length: 40mm

Pack of 4 Long Lacing Hooks

• Hole pitch: 12.7mm
• Hole diameter: 4mm
• Overall length: 48mm

Stainless steel small lacing hooks. Sold in packs of 4.

- Hole Pitch: 15.7mm
- Hole Diameter: 4mm

Seasure 23.76 Quick Release Kit. Supplied with rivet. The Seasure quick release universal joint is made up of 2 plastic components that twist to lock/unlock. It is available with a standard red joint

Seasure Clevis Pin. Sold singularity. Dimensions given are pin diameter x pin length.

A convenient way of securing and storing halyards and lines of all sizes around the boat

This lightweight and strong safety eye is manufactured from 316 stainless steel and is designed so that the safety hook can not be accidently released. The rubber stopper holds the eye firmly shut when not in use

Tiller Composite Universal Joint. ID Tube: 13.5mm

Shroud Adjuster

Spinnaker guy hook positioned close to the shrouds, these hooks retain the spinnaker guy when reaching or running

Seasure Back Flap Hinge. Superbly engineered stainless steel hinges with welded hinge pins

Stainless Steel Take Apart Hinge. Take Apart hinges are hinges that can lift apart so that a lid or door can be easily removed.. Manufactured from 316 cast stainless steel. Available for both left and right.

Clip for stanchion. Available in 1" (25mm) and 1.25" (32mm) sizes.

Stanchion Mounted Spinnaker Pole Bracket (15.71). Stanchion Mounted bracket for 25mm dia. stanchion. Manufactured from electro polished 316 stainless steel for a long, corrosion-free life. The flexible bracket can be used in places where crew may stand on them or where reduction in noise inside the boat is required

Used to keep webbing secure and tidy