Switches & Switchpanels

New Panel Design for Indoor and Outdoor use (IP65). Permanent Green LED label light, switching to RED for "ON"

 Marine Grade aluminium panel with 6 illuminating switches and 6 fuse holders. Includes 8 fuses - 2 x 3amp, 4 x 5amp and 2 x 10amp. Customisable with included labels.

 Marine Grade aluminium panel with 6 illuminating switches and 6 fuse holders. Includes 8 fuses - 2 x 3amp, 4 x 5amp and 2 x 10amp. Customisable with included labels.

 

 

Marine Grade aluminium panel with 4 illuminating switches and 4 fuse holders. Includes 8 fuses - 2 x 3amp. Customisable with included labels. 4 x 5amp and 2 x 10amp.

Polypropeylene construction and waterproof. 3 Positions - OFF - IGN - START. Thread itself is non-adjustable but brass washer can be adjusted to ensure a snug fit when installed. Maximum thread length 25mm / 1"

Polypropylene construction and waterproof. 4 Position Ignition Switch (Push Choke)

Spare key for the Seaworld battery master switch

Suitable for one or two battery installations to isolate or cluster the lighting and engine start circuits. Polycarbonate case, footprint diameter 134mm, height 65.7mm.

Battery Master Switch. May be fitted to either positive or negative circuit. Removal of key ensures engine cannot be started or lights left on. An excellent aid as an anti-theft device.

The 701 Contour Battery Master Switch offers a number of unique features. The highlights being the patented contour lock system, allowing it to be a stand alone unit, or locked together with other switches.

The 701- S Battery Selector Switch is the most compact selector switch available on the market. Housed in the same dimensions as the 701I and includes the same removable side plates and back cover. While BEP Marine foremost recommends isolated battery systems as outlined with their distribution clusters, the 701-S offers a simple economical way of seperating two batteries.

ETA Circuit Breakers. This neat design combines a thermal circuit breaker and switch in one unit. Push button on-off and breaker reset. The two colour button provides clear on/off indication. Single hole mounting.

Waterproof push button switch. 12v DC 20amp. Stem Length: 23mm. Stem Diameter: 16mm. Available with black cap (pictured) or red cap

Chromed Brass Push/Pull Switch. 12v DC 20amp, with chromed ABS pull. Stem Length: 32mm. Stem Diameter: 9.5mm. 2 terminals.

Thermo Plastic Push/Pull switch. 12v DC 6amp. Stem 19mm x 8mm dia.

Push Button switch for flush fitting. Momentary switch (only on when depressed) . Flat-plug connection and waterproof cover. For instrument panels up to 4mm thick.

Weatherproof Switch. 10 amp single pole. For 12mm aperature with flexible splashproof cover.

Rocker Switch mountings for rocker switches manufactured from injection moulded nylon. Available for end, middle or single rocker switches.

Controls any pump equipped with an automatic float switch. This unit features a black plastic panel. It has a built-in fuse holder and an internally lighted rocker switch with 3 positions (automatic, off, or manual) with the Rule "fail-safe" spring return to "off" from the "manual" position.

Rule 3-Way Panel Switch. Model 45. 12 / 24 / 32v. The "manual" position has a "fail-safe" spring return to "off" so you can't leave your pump running by accident. Black stainless steel panel. Measures approx 57mm x 52mm

The Seaworld Bilge Pump Control switch is used in conjunction with a float switch and can be used either manually or automatically. 

The Seaworld Bilge Control Switch and Alarm is a three-way switch with alarm incorporated. It has a illuminated type rocker switch and a screwdriver open-fuse holder.

The Seaworld Bilge Water Alarm is operated with a float switch

Foot switch to operate electrical devices without using your hands. Features safety cover to prevent accidental push-button operation. Both up and down switches are available in either black or white. It must be installed without using silicone.

Branch circuit breakers (can also be used for 24-hour circuit protection). Quick connect terminal style circuit breakers are incorporated into Blue Sea Systems WeatherDeck Waterproof Circuit Breaker Panels, Dual Battery Bank Main

Battery Isolation Switch DC12V / 180A. Max Load: 1000A for 5 sec. Dimensions: Width at widest point: 65mm. Overall Height: 125mm

Bilge Pump Control Switch. Waterproof with LED illuminated, 3 position rocker switch. 76 x 63mm. ON - OFF - Momentary ON

General purpose toggle switches available in a range of circuit options allowing these versatile switches to be easily integrated into a variety of different applications

General purpose toggle switches available in a range of circuit options allowing these versatile switches to be easily integrated into a variety of different applications

Thermo Plastic Snap Mount Replacement Rocker Switch, with plug-intype terminals and a red rocker, 12v DC 15amp.

 Blank Switch Cap for Momentary Rocker Switches. These fit the CQUIP momentary rocker switches

Specially manufactured by Carling Technologies for use in Blue Sea Systems' WeatherDeck® Panels. When mounted with a WeatherDeck® Toggle Switch Boot Rated IP67-temporary immersion for 30 minutes. Nickel-plated brass and phenolic non-corrosive construction

WeatherDeck® Toggle Switch Boot - Black (BSS4138). Replaces dress nut for mounting on WeatherDeck Panel Switches. Rated IP67-temporary immersion for 30 minutes. UV resistant material resists discoloration and cracking

Momentary Rocker Switch. Available as the following:(On) - Off - On / On - Off - On. Functions in (brackets) are momentary