TOWSURE

Constructed for standard duty applications, up to 100kg static nose weight, such as small leisure trailers. 48mm outer tube diameter

Trailer Board including right-hand foglight (a legal requirement on all trailers of 130cm and over in width), Triangular reflectors, Tail (including Number Plate), Stop and Direction Indicator lights

Max towing capacity 750kg. Fastens using 10mm wide bolts. The hole centres are 90mm, fits over 50mm wide box section.

7 Metre long webbed winch strap with cast hook

3m telescopic wash brush for car, van, truck, bus, caravan, boat, window cleaning or conservatory. Extends from 135cm to 300cm in length. Makes cleaning Faster, easier and smarter. No ladder required.

Boat Trailer 5" Vee Roller. Made of solid rubber

Boat Trailer Side Roller. Made of solid rubber. 8" long, 58mm diameter with 16mm hole. Supports the side of the boat and helps it roll on/off the trailer

113 x 75 x 96mm. Hole is metal lined and is 22mm in diameter. aMade from solid rubber, protects bow of boat when on trailer.

Fastens to the chassis with 50mm 'U' bolt (not supplied). 16mm diameter spindle.

Boat Trailer Double Side Roller 100mm. Made of solid rubber Overall width, including the two small protuding areas around the spindle hole, is 110mm.  Each individual roller is 30mm and the gap between them is also 30mm. Spindlehole is 16mm. Allows easy rolling against side of boat on/off the trailer.

Supplied with 12" long tubular steel pole, 34mm diameter. Has hinged top with 16mm spindle to take 2 x RB21 rollers.

Boat Trailer Keel Roller. Made of solid rubber. 5" long, 2 1/4" diameter with 16mm hole.. Used on boat trailers to allow the boat to roll on/off easily.

Diameter 120mm. Width 90mm. 32mm bore.

Made of solid rubber, 12" / 300mm long with 2 x 10mm threaded studs embedded. Stud centres - 230mm. Protects the side of the boat when on trailer. Comes complete with nuts.

Supplied on a 12" pole, 34mm diameter with pivoting bracket to take 30mm side roller. 

Supplied on a 12" long tubular steel pole, 34mm diameter. Has hinged top which takes part numbers RB10 side roller.

An economical trailer and caravan hitch lock suitable for most standard non-stabiliser hitches, the lock is fitted to the unhitched trailer and fully blocks the hitch from being attached to a towball. Strong heavy duty steel box construction with two positions for the locking tongue to accomodate different sizes and styles of trailer hitch.

Hump back keel block manufactured in long-lasting, non-marking polyurethane, avoiding unsightly black marks on a boat’s hull that some rubber products can leave.

6mm Lynch Pin used to prevent a wheel or other part from sliding off the axle

Available for 8" or 10" wheels. Plastic trailer mudguards which are easy to fit, having a flat profiled inner face allowing the mudguard to be screwed directly to the side of a box trailer without brackets. Sold singularly 

High adherence! High build! High performance! Red oxide primer is a typical topcoat primer, which adheres to both interior and exterior metal surfaces, and provides a smooth protective base for overpainting

To suit RB16 Ribbed Roller. Complete with 2 bushes, washers & split pins. Does not include stem or roller bracket.

Solid tyre sandhopper launching wheel in red. Spindle size: 25mm, Rim diameter: 220mm. Rim and Tyre Size: 260mm

This cable attaches the trailer to the towing vehicle whilst towing and provides a secondary link. A secondary coupling is a legal requirement for all unbraked trailers.

Breaking cap 1500 kg, working cap 500 kg. Complete with 6 metre strap and hook.

Front and rear taper complete with ball racers