Trailer

Constructed for standard duty applications, up to 75kg static nose weight, such as small leisure trailers. 34mm outer tube diameter

Constructed for standard duty applications, up to 100kg static nose weight, such as small leisure trailers. 42mm outer tube diameter

Constructed for standard duty applications, up to 100kg static nose weight, such as small leisure trailers. 48mm outer tube diameter

Max towing capacity 750kg. Fastens using 10mm wide bolts. The hole centres are 90mm, fits over 50mm wide box section.

Fastens to the chassis with 50mm 'U' bolt (not supplied). 16mm diameter spindle.

Bolt-on clamp for use with trailer jockey wheels. Available in 34mm, 42mm and 48mm sizes.

Available for 8" or 10" wheels. Plastic trailer mudguards which are easy to fit, having a flat profiled inner face allowing the mudguard to be screwed directly to the side of a box trailer without brackets. Sold singularly 

Breaking cap 1500 kg, working cap 500 kg. Complete with 6 metre strap and hook.

Front and rear taper complete with ball racers

Solid tyre sandhopper launching wheel in red. Spindle size: 25mm, Rim diameter: 220mm. Rim and Tyre Size: 260mm

25mm Stainless Steel Ratchet Strap with Stainless Steel Claw. Available in 6 metre length or 8 metre length. Not certified for lifting.

7 Metre long webbed winch strap with cast hook

Heavy Duty 50mm Ratchet Strap with Claw Hook. Available in 6 metre (green) or 10 metre (blue) lengths. 2500kg RAS (Rated Assembly Strength). 5000kg MBS (Minimum Breaking Strength). Not for lifting.

Made of solid rubber, 12" / 300mm long with 2 x 10mm threaded studs embedded. Stud centres - 230mm. Protects the side of the boat when on trailer. Comes complete with nuts.

Supplied on a 12" pole, 34mm diameter with pivoting bracket to take 30mm side roller. 

This cable attaches the trailer to the towing vehicle whilst towing and provides a secondary link. A secondary coupling is a legal requirement for all unbraked trailers.

 Safe, Secure, Tight. Quick automatic release. Ideal for cars, trucks, boats and motor cycles

 

Boat Trailer 5" Vee Roller. Made of solid rubber

Boat Trailer Side Roller. Made of solid rubber. 8" long, 58mm diameter with 16mm hole. Supports the side of the boat and helps it roll on/off the trailer

113 x 75 x 96mm. Hole is metal lined and is 22mm in diameter. aMade from solid rubber, protects bow of boat when on trailer.

Boat Trailer Double Side Roller 100mm. Made of solid rubber Overall width, including the two small protuding areas around the spindle hole, is 110mm.  Each individual roller is 30mm and the gap between them is also 30mm. Spindlehole is 16mm. Allows easy rolling against side of boat on/off the trailer.

Boat Trailer Keel Roller. Made of solid rubber. 5" long, 2 1/4" diameter with 16mm hole.. Used on boat trailers to allow the boat to roll on/off easily.

Diameter 120mm. Width 90mm. 32mm bore.

To suit RB16 Ribbed Roller. Complete with 2 bushes, washers & split pins. Does not include stem or roller bracket.

Hump back keel block manufactured in long-lasting, non-marking polyurethane, avoiding unsightly black marks on a boat’s hull that some rubber products can leave.

6mm Lynch Pin used to prevent a wheel or other part from sliding off the axle

Single pneumatic launching wheel. Diameter: 260mm. Width: 85mm. Max Load: 300lb (136kg) at 30psi

Supplied with 12" long tubular steel pole, 34mm diameter. Has hinged top with 16mm spindle to take 2 x RB21 rollers.

Supplied on a 12" long tubular steel pole, 34mm diameter. Has hinged top which takes part numbers RB10 side roller.

Trailer Board including right-hand foglight (a legal requirement on all trailers of 130cm and over in width), Triangular reflectors, Tail (including Number Plate), Stop and Direction Indicator lights