WAVELINE

Connect up to 3 appliances to 1 Mains hookup. Ideal for the Marina situation where Boats are stacked and one mains hookup is shared. Also good for the camp site where you and your friends are sharing the hookup or you simply need to split the power between a Caravan and other requirement. Perfect for Stage where splitting the mains supply is needed and also street traders sharing the single outlet.

Round stainless steel ring. Made from 304 Stainless Steel

45mm
- Internal Diameter: 45mm
- Ring Diameter: 6mm

75mm
- Internal diameter: 75mm
- Ring diameter: 10mm

316 Grade Stainless Steel Eyestraps. Size given is for the thickness of the eyestrap.

Aluminium Telescopic Boat Hook. Manufactured in silver anodized aluminium pipe. Supplied with plastic hook. Heavy duty 30mm dia aluminium tubing. Diameter: 30mm. Length (closed): 1.2m. Length (extended): 2.1m
 

Manufactured in silver anodized aluminium pipe. Supplied with plastic hook. Heavy duty 25mm dia aluminium tubing. 210cm long. Fixed length.

Internationally recognised daytime signal.
Used by vessels when at anchor.
Constructed from tough polypropylene.
Folds easily for storage.
Diameter: 30cm

Wire Steering Cone Black 70mm x 100mm

Wire Steering Cone Black 75mm x 110mm

Wire Steering Cone Black 90mm x 100mm

Buoycatcher's top quality and stylish looking telescopic poles are made from anodised aluminium with a black satin finish and striking red contrasting locking tabs that are easy and secure to adjust to the required length.

Premium all-weather folding boat seat. Features a fixed strap to hold the back of the seat down when not in use. Heavy-duty marine grade vinyl construction. Covered with a UV and mildew resistant vinyl. Compression Foam Padding.

Floating telescopic boat hook. Extendable from 120cm to 210cm. Floats for easy retrieval if dropped overboard. Hook itself can be unscrewed from the handle, meaning easy replacement if the hook becomes damaged or lost.

Fuel Line Hose Kit for Mercury / Mariner Outboard EnginesFor use with most newer model Mercury outboard motors

The French style anchor is the only flat anchor with a shank designed not to foul, thus preventing the anchor from breaking away. It bites into the seabed within seconds.

Grey Cleat Rib Grab Handle. Colour: Mid grey. Handle length: 220mm. Overall length: 260mm. Width: 116mm

Hose Line Hose Kit for Yamaha / Hidea Outboard Motor Engines. Minimum length of 6ft (1.8m)

Site mains coupler plug - female version. Available in 16amp and 32amps. Rated 220-250 volt. Both are splashproof to IP44 rating.

Boat/Caravan Hook Up Lead replacement site plug with 2-pin and earth plug, for connection on of the mains hook-up lead to the site bollard. Available in 16amp and 32amp.

Orange Sea Anchor Drogue

Covers for engines are ideal for their protection against water, sun and dust.  They are made from extra strong polyester 420D and are 0.15mm thick for maximum water resistance and UV protection.  The top part engine covers are available for engine sizes ranging from 2.5hp up to 60hp. Each of the engine covers is available in silver.

Rope clamps allow the creation of a loop at the end of a multi-strand rope without the need to whip or splice.

Aluminium jointed oars.

Available in two sizes:

• 1.34m overall length for 1.85-2.30m boats
• 1.64m overall length for 2.50-3.30m boats

Universal primer bulb for petrol hose / setups. Available with 8mm or 9.5mm (5/16" or 3/8") hose connections.

Pre-spliced dockline with a braided nylon core and 16 plait polyester cover

Pre-spliced dockline with a braided nylon core and 16 plait polyester cover

Sail Mast Centipede. Mast centipedes are used to secure a rolled or reefed sail to the mast or boom of your vessel. Has a nylon toggle/loop fitting for an easy fit.

• Length: 2 Metres
• Cord Diameter: 8mm
• Number of Cord Pairs: 7

Orange drogue in nylon fabric for fitting to danbuoys, horseshoe or lifejackets.

Stainless Steel Captive Pin Dee Shackle. Captive pin means that the pin is held captive in the shackle and so cannot fall out into the water!

Stainless Steel 316 Carbine Snap Hook with Eye. Marine grade 316 A4 stainless. Not certified for lifting. An ideal way to quickly and effectively attach various fitments. Eyelet makes this hook ideal for keeping attachments at the bottom end securely in place. Also referred to as a carabiner, karabiner, crap, snap link...

Stainless Steel D Ring including Grey PVC Patch 

Stainless steel egg type snap / tack hook. Grade 316 A4 stainless steel. Not certified for lifting. Built in safety catch for security.

Screw type stainless steel hollow base cleat.

Available in 4", 6", 8" and 10" sizes

Grade 316 A4 stainless. Not certified for lifting. Ideal for use in salt water conditions or where there are high levels of moisture and humidity. The key pin remains attached at all times whether open or closed, preventing any risk of losing the pin.

For connecting two permanent tanks to a single >60hp motor. Provides withdrawal from one tank at a time.

By simply attaching these wheels to your tender, you will be easily able to wheel your tender anywhere over hard sand and paved surfaces. You will no longer risk damaging your tender by dragging it or struggle to carry it any longer! Waveline Tender Wheels are easily installed on wood, fibreglass, or aluminium transoms. The wheel is designed to be permanently fixed to your tender without inhibiting performance.

Valve Key for Waveline XS/Eco 2012

Waveline 7x50 Waterproof & Floating Binoculars

7x50 Auto-Focus Marine Binoculars. Easy to use, indispensible on board! Ideal for land or sea. Auto Focus. Impact-Resistant. Non-slip Rubber Grip. Flexible Rubber Eyecups. Durable Alloy Aluminium Casing. Water-repellent. Outstanding Brightness. Carry Case & Strap

Fuel Hose Fitting: Tank End. Use with Honda (under 75HP). For 3/8" I.D. Hose

Waveline Honda Female Engine Connector 3/8" Barb. Fuel hose fitting: Tank end. Eliminated leaks and improves clamping strength. Use with Honda brand motors. For 3/8" I.D. Hose

Fuel tank fitting for use with Honda brand tanks. 1/4" Male NPT Threads

Waveline Honda Male Fuel Tank Connector Nickel Plated Brass. 1/4" NPT Bayonet. Use with Honda. 1/2" Male NPT threads.

Waveline Johnson / Evenrude / OMC 1/4" NPT Male Quick Connect Tank Fitting. Fuel tank fitting for use with Johnson / Evinrude / OMC motors. 1/4" Male NPT Threads.

Waveline Mercury / Mariner Die Cast / Brass Female Twist Lock 3/8" Barb. Fuel hose fitting: Engine end. Use with Mercury / Mariner brand motors. For 3/8" I.D. Hose

Waveline Mercury / Mariner Female Quick Connect 3/8" Barb. 2 Prong clip plastic fuel engine connector. Fuel hose fitting: Tank End. Eliminates leaks and improves clamping strength. Use with Mercury / Mariner brand motors. For 3/8" I.D. Hose

Waveline Mercury / Mariner Female Twist Lock. 3/8" Barb Nylon Tank Fitting

Waveline Mercury / Mariner Male Brass Male Quick Connect. 1/4" Male NPT Thread

Waveline Mercury / Mariner Male Twist Lock for 3/8" ID Hose. Fuel hose fitting: tank end. Use with Mercury / Mariner brand motors. For 3/8" I.D. Hose

Waveline Mercury / Mariner Tank End Fuel Hose Fitting - 3/8" I.D. Hose. Part number A04B54

Waveline stainless steel deckfiller with 1 1/2" hosetail. Includes two-prong key for the easy tightening / removal of the lid. Lid is chained to the deck filler meaning that it cannot be lost overboard or misplaced. Lid is sealed with a rubber o-ring to ensure watertightness. The top of the deckfiller has the purpose engraved on it - Diesel (as shown in image), water, or fuel.

Waveline WL-01004 stainless steel outboard motor bracket with PVC pad. For engines up to 30kg. Spring loaded and adjustable with 5 vertical positions.

Waveline Suzuki Straight Brass / Nickel Plated Tank Fitting. For use with Suzuki brand motors (75HP and up). 1/4" Male NPT Threads

Suzuki Female Quick Connect

Fuel hose fitting: Tank & engine end

Use with Suzuki (under 75hp)

3/8” Barb Tank Fitting

Waveline Suzuki Nickel Plate Tank Fitting Fuel Connector. For 5/16" I.D. Hose. Suitable for Suzuki Engines under 75 HP

Waveline Fuel Hose Fitting: Tank and Engine Side. Use with Yamaha / Hidea. For 3/8" I.D. Hose

WaveLine Fuel Tank Fitting. For use with Yamaha / Hidea brand motors. 1/4" Male NPT Threads.